Jonsered Chainsaws

[Real1shepherd]

Picked this up yesterdayView attachment 1108166

Good score.....I have the 2094. The 2094/2095 are really large cc workhorses! Plus you get to use the Large Mount Husky bar pattern.

Kevin

 

[Real1shepherd]

No specific little John boxes just lots of the Jred stuff for the saws I have or work on for others. I have very nice Lil’ John saw but don’t have a lot of parts for them. Most of my parts are for the 49 through 111 Jonsereds. With a fair stash of 910 parts and the later 6XX series saws parts.
Can’t anywhere near fit all the parts in those boxes…. They don’t take big stuff like case halves, recoil or clutch covers, P&C kits etc. Great for bearings, rings and the multitude of small parts for these saws

Yeah, it probably wasn't the intention of Jonsereds to have those boxes supply everything. I bet it was to organize (and not lose!) the smaller parts.

Still.....those boxes filled with old Jonsereds parts are saw sexy as heck!


Kevin

 

[ErnieG]

Yes, two mounting points would be better than one. I would only add to watch the aftermarket stuff for quality and fitment.

Kevin

The replacement is an OEM

I try and steer clear of anything aftermarket if possible .

Thanks
Ernie

 

[Real1shepherd]

The replacement is an OEM

I try and steer clear of anything aftermarket if possible .

Thanks
Ernie

Atta boy!!

Kevin

 

[ErnieG]

Just for some piece of mind the closer line to the piston is the supply and the one back towards the handle is the return ... correct?


Thanks
Ernie

 

[RedneckChainsawRepair]

Cant recall but might have a pic saved. Maybe one helps.

I just put them back way they were.

 

[ErnieG]

Cant recall but might have a pic saved. Maybe one helps.

I just put them back way they were.


View attachment 1109542View attachment 1109544View attachment 1109545

Do you know which line is the fuel pickup and which is the return into the carb?

Thanks
Ernie

 

[RedneckChainsawRepair]

Do you know which line is the fuel pickup and which is the return into the carb?

Thanks
Ernie

Not without going out to my saw and looking at it. GL

 

[RedneckChainsawRepair]

Do you know which line is the fuel pickup and which is the return into the carb?

Thanks
Ernie

@taplinhill posted this here in years past.

All in a search of same question you ask. Top right of website is a search bar to try if needed.

 

[Cantdog]

Just for some piece of mind the closer line to the piston is the supply and the one back towards the handle is the return ... correct?
View attachment 1109527

Thanks
Ernie

Yes

 

[Real1shepherd]

Could always tug on the line with the filter in the tank and see what moves in the airbox....unless they go into that vent box J'reds used

But yeah, you got it correct.

Kevin

 

[WoodDean]

Hey Dean!! How's that 90 running??

Still running great Robin!!! Just had it out the other day and was thinking I should check in on the forum and let yinz know I'm still kickin.

 

[WoodDean]

Hey Dean! Back in the day....


Kevin

HAHAHA!! You remembered!!!
Cheers Kev

 

[edju1958]

I was just catching up on posts here & noticed the comment that the "Lil Jon was made by Poulan,only painted red.Nothing could be further from the truth."Lil Jon,M36,361,were all made in Trail,B.C.Canada,as was the Husky 35,Danarm 1-36,Pioneer P10,Frontier Mark I & F 35,Partner 330,Skil 1612-1616,& probably others as well.

Speaking of Jonsered 361,I'm looking for the oil/fuel tank gasket,part # (507) 100042.I can't find any of these gaskets anywhere.If need be,I can make a gasket,but need to know the correct thickness of a gasket material to use.

 

[Cantdog]

I was just catching up on posts here & noticed the comment that the "Lil Jon was made by Poulan,only painted red.Nothing could be further from the truth."Lil Jon,M36,361,were all made in Trail,B.C.Canada,as was the Husky 35,Danarm 1-36,Pioneer P10,Frontier Mark I & F 35,Partner 330,Skil 1612-1616,& probably others as well.

Speaking of Jonsered 361,I'm looking for the oil/fuel tank gasket,part # (507) 100042.I can't find any of these gaskets anywhere.If need be,I can make a gasket,but need to know the correct thickness of a gasket material to use.

https://www.acresinternet.com/cscc....50c3ba55f5526e1f88256cb50014b0d8?OpenDocument

https://www.acresinternet.com/cscc....9269172f81aeb6f5882588fe00758ef8?OpenDocument

 

[ErnieG]

I was just catching up on posts here & noticed the comment that the "Lil Jon was made by Poulan,only painted red.Nothing could be further from the truth."Lil Jon,M36,361,were all made in Trail,B.C.Canada,as was the Husky 35,Danarm 1-36,Pioneer P10,Frontier Mark I & F 35,Partner 330,Skil 1612-1616,& probably others as well.

Speaking of Jonsered 361,I'm looking for the oil/fuel tank gasket,part # (507) 100042.I can't find any of these gaskets anywhere.If need be,I can make a gasket,but need to know the correct thickness of a gasket material to use.

If you have a pic of what you need it may be in this kit and if be glad to help you out.

Ernie

 

[edju1958]

https://www.acresinternet.com/cscc....50c3ba55f5526e1f88256cb50014b0d8?OpenDocument

https://www.acresinternet.com/cscc....9269172f81aeb6f5882588fe00758ef8?OpenDocument

Well,I'll be damned!

 

[edju1958]

If you have a pic of what you need it may be in this kit and if be glad to help you out.

Ernie

Ernie,I may have to take one of the saws apart to give you an idea.I may have one left,but it seems to me that it was broken.I'll need a couple of those gaskets.I'll have to look over the weekend.

 

[ErnieG]

Ernie,I may have to take one of the saws apart to give you an idea.I may have one left,but it seems to me that it was broken.I'll need a couple of those gaskets.I'll have to look over the weekend.

I think I found a pic ...is this what it looks like ?

 

[RedneckChainsawRepair]

Don’t know why I am so fascinated with my user jred 670 champ. Late 90’s
But I just can’t stop setting the NOS stuff back for it.
Just love the red black and gold I guess.

Goes good with the NOS clutch cover and the NOS decal I put on it already.

Then here is the afm ones Gary in my CR group on FB makes too. Close as he can get them for now.

All the other afm ones he makes look like the real deals for those into that sort of stuff.