jonsy 670

[bandmiller]

Guys is a jonsered 670 partswise the same saw as a husky 266, will the top plastic cover off a 670 fit the husky.?? thanks frank

 

[eric_271]

670

I have never seen a husky that looks like my 670 and not saying there is not one i just have not seen it if there is. The engine parts are the same the way im told but thats about it I think.

 

[eyolf]

Sort of the same. Basic chassis is pretty much the same...case halves, rotating assy, jug, carb etc. You can put all of the Jonsered covers, tank, etc on a husky, or vice versa, but they all need to go together...cant mix and match.

Do you have a junk 670? I'm looking for a rebuildable core...I have an extra 272 husky jug, carb and piston, want a Jonsered 625/630/670 carcass to build on. I think I have a top cover for either a 268 or 272 laying somewhere.

 

[Swannie]

eyewolf

I would be interested in those 272 parts you speak of for a 272 I have that needs freshened up on the top end. I have 4 bottom end 272 class assy's I picked up in a lot of parts I bought one time, I have not cleaned them up and checked out exactly what they are yet, could be a 266 mixed in there. I could check and see and if so see if its any good. you can PM me or email me if you want to follow up on this.

 

[eyolf]

I'm mostly interested in keeping the 272 Jug: I have a stock 670 and want one w/ 272 top end on it too. When I find a repairable core, I want to send the whole works out to be "massaged".

 

[Stumper]

I think that the 670 was the direct equivalent of the 268. I love mine(Husky 268xp)

 

[eyolf]

The 670 has closed loop transfers like the 266/268xp. There was also a plain-jane 268 with open transfers. Same bore on all three.