KD Hotsaw, I Good News!

[ehp]

not sure how but Gypo and I somehow cracked the pipe on the 3120 in our travel out east and i made the first cookie good but she opened up on the switch , lost alot of torque on the up cut but got it off just slower than i wanted to cut it in

 

[Marky Mark]

I think you have to tape Johns throttle down, every cut he makes he lets off on the gas. I have a video Tom and Dennis put together for me on making the cuts. Next we have to have the bore cut compition. John there's a copy on it's way. Dennis Does a nice Naration and Tom does all the cuts. PLus there is a few clips of Tom filing I will call him and ask if I can send tape. Dennis also wanted me to tell you guys he says HI

 

[Bernard]

ehp

Your saws and sawing are looking good. Keep that up and everybody will be running ehp saws.

Could you have beaten the rotax in a cold start 2cut race?,
If your pipe was in good shape.
Bernie

 

[ehp]

NOOOOOOOOOOOOOOOOOOO
I could not beat that rotax period , something would have to break, Paul just took a easy run cause we were slow in that wood
but when the stand moved on his up cut ,that made the old rotax bark, you can see the smoke off the bar or chain in the video
Bernard we did some testing the day before in white pine which i never get to cut out here
size 13 by 13 inch
1/2 inch chain .86 per cut
.404 chain .62 per cut
3120 1.33 per cut ,the 3120 did not seem to like the pine and i am sure would of cut aspen faster
if i am going to run with a rotax , i guess i will need a bigger motor in the 3120 like a 187 cc engine and would you not believe I just have 2 of them sitting in the corner , not saying that i would beat them but i know i will be alot closer