lets get Christmas started early this year

[leecopland]

I really wish I had more to offer up for all the knowledge I have absorbed from you. I have some 16" and 18" 325 safety chain crap from acouple saws I have aquired. I will make it beautifully sharp if you want it.

I could find a use for those chains if they are still available. I can also cover or share in shipping as I'm north of the border!

Thanks,

Lee

 

[redfin]

I could find a use for those chains if they are still available. I can also cover or share in shipping as I'm north of the border!

Thanks,



Lee

Hi lee, I was messing around on oregon site last night. These chains have 16 stamped on the drivers. Which according to the chart is .404 gauge. Can you still use them? I will edit my original post.

 

[tlandrum]

are you sure its 16 or 91? 91 is 3/8 low pro file

 

[leecopland]

Hi lee, I was messing around on oregon site last night. These chains have 16 stamped on the drivers. Which according to the chart is .404 gauge. Can you still use them? I will edit my original post.

Hi Redfin, I only have one saw that takes a .404 and the chain from it has 65 drivers, so I guess it's about 16". If you had one to match that it would be useful, otherwise I'll pass.

If it is 91 on the drivers it is 3/8 lopro and I have a lot of that myself. .404 measures 7/8" over three rivets.

Thanks for the trouble you've gone to.

Lee

 

[redfin]

As I said I don't have much lknowledge to share yet! But I can assure you I'm soaking it all in,

Looking at the drivers pointed down it reads 91. So these would be .375 x .50. I went out to the shop this am and put my mic on one. I'm reading about .36 centered on three rivits. The drivers only mic out to about .037. Which confused me a tad so I checked this against a brand new stihl .375 x .50. The drivers were almost identical.

So in reality I could run the 91 oregons on my .375 x .50 stihls?

Sorry for the confusion. Lee pm me your addy and I will ship them out to you.

 

[tallfarmboy]

Anyone want an old Sears/Roper D-44 chainsaw? Complete and very straight... BUT, no spark. It's really dirty, but would make a nice saw for someone... I'm a teacher (poor), so you'll need to help on shipping.

Free saw! Look at that awesome roller nose bar!
This thread is moving so much slower this year. I wish the website hadn't experienced problems, seems to have really hurt traffic.

 

[leecopland]

As I said I don't have much lknowledge to share yet! But I can assure you I'm soaking it all in,

Looking at the drivers pointed down it reads 91. So these would be .375 x .50. I went out to the shop this am and put my mic on one. I'm reading about .36 centered on three rivits. The drivers only mic out to about .037. Which confused me a tad so I checked this against a brand new stihl .375 x .50. The drivers were almost identical.

So in reality I could run the 91 oregons on my .375 x .50 stihls?

Sorry for the confusion. Lee pm me your addy and I will ship them out to you.

You are not the only one confused. I've been trying to find out if I can run 91 lopro chain on my saws that run normal 3/8th chain. I've not had a good answer yet. I do have a good supply of 91 thanks.

Regards,

Lee

 

[o8f150]

got the bar in yesterday that I got from a member off this thread,,, took over an hour to get it to work but its on,,, had to do a lot of modifying

 

[axlr8]

If memory serves, that 510 has the same ignition (Bosch) and is kinda hard to find.

Anyone with an old 056 magnum (with Bosch) would be quite happy just to get the ignition.

As would someone with an old SD.

INCORRECT... the TS 08 and TS 360 is what your thinking of. This saw is just like the 051 but with a HD filter and a cutoff saw attachment.

Its claimed!

 

[bezza1]

up for grabs i have this little partner was running needs starter spring and couling bolts
yours for the postage

 

[sachsmo]

INCORRECT... the TS 08 and TS 360 is what your thinking of. This saw is just like the 051 but with a HD filter and a cutoff saw attachment.

Its claimed!

Oh well,

never was much on Stihls anywho.

Thanks for the correction, I remember "some' of the old cut-offs had that bloomin' Bosch.

I actually have a few spares for me old SDs.


Merry Christmas One and ALL!

 

[marti384]

I have a 3/8 50ga 72 dl small mount husky bar used but good if any one need's let me know I also have a oem 55 crank if needed.

Do you still have the bar? Will it fit a 455 rancher?

 

[rattler362]

Do you still have the bar? Will it fit a 455 rancher?

I do and it will and it is yours.

 

[axlr8]

next up i have a aftermarket 026 piston, new no rings or circlips yours for the shippin'

 

[redfin]

You are not the only one confused. I've been trying to find out if I can run 91 lopro chain on my saws that run normal 3/8th chain. I've not had a good answer yet. I do have a good supply of 91 thanks.

Regards,

Lee

Can someone answer this?

 

[Steve NW WI]

Can someone answer this?

I'm no expert, but from what I've read, while the pitch is similar, that's about it. Drive link shape, etc., means that 3/8 LP (like the Oregon 91) does not work on full size 3/8" equipment. It'll fit, but not right, and tear up the chain and sprockets in no time.

Some of the milling guys have adapted sprockets to run 3/8LP on big saws, if you're interested, ask over in the milling and sawmills section.

 

[sefh3]

I have a Lombard L starter cover. Not sure what it came off.

Also have some cases for 026's. As you can see the one was tried to fix with JB weld.

I don't know of the conditions. They came to me in a box of parts. Pay the shipping and they are yours.


Merry Christmas!!!

 

[sefh3]

 

[leecopland]

1 Golf piston for Stihl ms170 37mm clips and plain pin but no rings. $5.00 towards postage appreciated. Homelite Super XL (the one developed from the XL12) recoil, flywheel and points Zama carb, reed pyramid or the whole parts saw (90psi) for cost of shipping

Good to give back

Lee

 

[kc4sfe]

Still have Walbro WT875A available...... pulled from a blower.... will have more stuff soon........