lets get Christmas started early this year

[diggers_dad]

Here is the 3400 Poulan courtesy of Marc, Diggers_Dad he sent my way for the price of shipping! Thanks again!
Went through the saw, cleaned everything, new fuel lines, filters, carb kit, etc. Still going to do a muffler mod, so have not started it yet. Just put the muffler on for the pic. P/C are excellent! I had this old Poulan banana nose bar. Figured it would be a good one for this saw.

Gregg,

Hmmmm.....

From looking at those pics I must have sent the wrong saw. Dang it! That bar looks great.

Nice work Gregg. I'm glad it went to a home where it will be appreciated. Merry Christmas!

dd

 

[cambl]

I have a Homelite 360 and a 350 (project saws) in the Tradin' post if anyone is interested. Free but you pay UPS ground.

 

[leecopland]

I have a K095 bar or two. What pitch is your saw running? I'd be happy to look for one and find a chain for it too. If I have one it can be yours for shipping. What length did you have in mind?

dd

I'm running a 20" .325 B&C on my 49sp and it seems to suit the saw very well.

Lee

 

[Milkman31]

I have some nice 036 Pro plastic. The air filter cover will only fit the "Pro". Not the standard.. So I ask that you have a Pro if you want it. The filter cover is cracked, but doesn't affect performance.

Asking for price to ship ($5 give or take?)

View attachment 320544

I would like to have this but I have no idea how to send you the money

 

[DexterDay]

I would like to have this but I have no idea how to send you the money

Sorry. Someone PM'D already and it's taken.

Wish I had more to go around. I have an aftermarket rear air filter cover for an 036 Pro/MS 360? If you need it?

 

[Milkman31]

Sorry. Someone PM'D already and it's taken.

Wish I had more to go around. I have an aftermarket rear air filter cover for an 036 Pro/MS 360? If you need it?

Thanks but I have a good air filter cover but someone got a nice top cover

 

[redray46]

While looking for a part for the swap thread,I found a Poulan 2775 Farmhand, clutch cover/chain brake in decent condition,yours for the shipping.
RR

 

[Bob95065]

I'm running a 20" .325 B&C on my 49sp and it seems to suit the saw very well.

Lee

I checked it using a 3/8" chain and it seemed to fit. I would think .325" would be better. I can always change the sprocket. I am grateful for your offer no matter what I run on the saw.

 

[diggers_dad]

I checked it using a 3/8" chain and it seemed to fit. I would think .325" would be better. I can always change the sprocket. I am grateful for your offer no matter what I run on the saw.

I know I have a 16", .325, .050, 66 dl in a K095 mount. It's brand new and shiny. I also have an 18", 3/8ths lo pro, .050 in that mount configuration. It is also new with a new chain. Either or both can be yours for shipping. Shoot me a PM if either of those are what you're looking for.

dd

 

[cobey]

btt

 

[cobey]

sorry I dont have spikes on any of the xl101-104 stuff, I do have some other stuff, one has an auto oiler but the case is shot

still have a few xl101/102 parts to give away for cost of shipping

 

[Eccentric]

Thanksgiving Bars Update

1)30" D096 mount Hardnose will go to Cobey.

2)20" Carlton K095 (Carlton mount 1) bar will go to Bluesportser02.

3)16" Oregon D096 mount laminated sprocket nose bar will go to Jimmy in NC.

4)14" Tiger A041 mount laminated sprocket nose is still up for grabs.

5)Used 12" laminated S174 mount hardnose is still up for grabs.

Guys if you haven't given me your address for a shipping quote please send it to me. I'll get these boxed and send you guys shipping quotes soon. May not be until Friday or Monday however. Tied up with family/holiday stuff for the next few days.

Sorry for the delay fellas. Been dealing with some minor health/medical issues that've killed most of my free time for the moment. Will get you shipping quotes soon. Won't ask ya for shipping money until I'm ready to get the bars out. Bars #4 and #5 are still unclaimed.

 

[bluesportster02]

Sorry for the delay fellas. Been dealing with some minor health/medical issues that've killed most of my free time for the moment. Will get you shipping quotes soon. Won't ask ya for shipping money until I'm ready to get the bars out. Bars #4 and #5 are still unclaimed.

no hurry your health is more important than giving me a bar get well soon

 

[decableguy2000]

I have some Husqvarna 261/262xp parts. Specifically, muffler, muffler bracket, top shroud cover, w/ filter cover, Handle Filler (503404701)

Got the parts today. Thanks a ton.

Jeremy

 

[cobey]

Sorry for the delay fellas. Been dealing with some minor health/medical issues that've killed most of my free time for the moment. Will get you shipping quotes soon. Won't ask ya for shipping money until I'm ready to get the bars out. Bars #4 and #5 are still unclaimed.

get well man no hurry

 

[marti384]

Received the bar from Rattler, thank you very much, it is perfect. I thought that I had a 72 dl chain for it, but mine is 74 dl. So does anyone tie straps and presets for 3/8 Oregon chain they want to get rid of so I can shorten it up?

 

[Lark-o]

I felt bad I didn't have anything to give out so I made a stihl flywheel puller to go to a good garage in need of one. It's the smaller of the 2 stihl pullers I think it works up to a 044. Body Made out 17-4 stainless with a SHCS turned to a point on the end.

 

[abramj]

Pm sent on puller.

 

[nstueve]

Pm sent on puller.

Nuts...

How bout some giving... Anyone into John Deere/ echos?

Not sure if this one still has bar but will include if it does! This is a Deere 55ev. The broken top handle mount removes with 2 allen head bolts and IS NOT part of the case!

Unsure of either mechanical condition.

Free, you cover USPS ground.

Also have several homelite EZ's with good spark and P&C if anyone is interested...

 

[abramj]

Another PM sent on JD saws