Mac super 6-10 value

[Mustang71]

My boss is cleaning out his parents house and I pulled a very nice complete super 6-10 automatic out of the scrap pile in the dump trailer. I'm not looking to sell or anything. I don't see any on ebay so I'm curious about the value to satisfy my find. All the other x-10's go for 300 plus on ebay. I'd like to cut with it, the oiler push button is interesting.

 

[Jethro 2t sniffer]

Good score

 

[heimannm]

I follow many of the eBay auctions to have an idea of the value various saws will demand.

Average for 6 of the 6-10/Super 6-10 machines sold on eBay =$99

5-10 models also average around $95-$100

I have followed almost 50 different 7-10 auctions, average $196

I think the right hand starter on the 5-10 and 6-10 models keep some buyers away.

Mark

 

[Mustang71]

I follow many of the eBay auctions to have an idea of the value various saws will demand.

Average for 6 of the 6-10/Super 6-10 machines sold on eBay =$99

5-10 models also average around $95-$100

I have followed almost 50 different 7-10 auctions, average $196

I think the right hand starter on the 5-10 and 6-10 models keep some buyers away.

Mark

I guess it didn't phase me when I pulled it to see about compression but yeah the pull start is on the wrong side. Like I said I have no plans to sell. I'll get it running and sharp and put it on the shelf with the rest. I use my 051 and 028 regularly and this is a cool addition.

 

[Joe Crow]

Someone is selling an OEM McCulloch Mac 6-10 Chainsaw engine assembly.
Will this fit on a Mac 10 10 frame?
Thanks

 

[Jethro 2t sniffer]

Someone is selling an OEM McCulloch Mac 6-10 Chainsaw engine assembly.
Will this fit on a Mac 10 10 frame?
Thanks

Yeah it can work. If the whole engine. The other bits are all common or close enough

 

[heimannm]

There is a difference in the thickness of the insulator that goes between the cylinder and the tank bottom, the 6-10 will require a thinner on, the 54cc saws use a thicker one to make up the difference in the diameter of the cylinder. Parts are readily available.

Mark

 

[Joe Crow]

Thanks for the input