Scrounging Firewood (and other stuff)

[diver64]

I bought primers as well as powder several years ago whenever I saw them on sale. I just looked and still have 15k of all types on the shelf. I have several 8lb kegs of Promo I bought when they were on sale for under $100. Seems expensive at the time but pull the trigger if you see them for a reasonable price, nothing is going to get cheaper I'm afraid.

I meant to say I have 15k of each type of primers. SPP, SPM,SRP, SLP. Not so many shotgun but still a couple of sleeves of Cheddite I saw for a good price on sale online somewhere. I just started loading shotgun so that Promo is going to come in handy.

 

[diver64]

Small world. When I had the '79 Camaro, a neighbor had a '80 Cordoba, like this one (iirc).
View attachment 1219306

Always reminds me of Ricardo

 

[diver64]

My Whelen could probably be improved upon, grabbed some 250gr Speers that need to find homes

Mine sure fits the spot between my 30-06 and 416 Mag. No real need for it but I like it anyways and I can feed it squib loads with 357mag lead for plinking.

 

[chipper1]

Mine sure fits the spot between my 30-06 and 416 Mag. No real need for it but I like it anyways and I can feed it squib loads with 357mag lead for plinking.

Never heard a squib being a positive thing .

 

[Lee192233]

Always reminds me of Ricardo

I drove a white 1992 New Yorker for a couple years. Mine had an all blue interior with plush velour upholstery. That was the epitome of 90s big three "luxury". Drove like a boat but it sure was nice on the highway. Popped my favorite cassette in the radio and just cruised.

 

[MustangMike]

I also try to use ball power when I can. One thing, when working with 6mm Rem and 22-250 I found necking closer to the lands would make the bullet strike higher. Every caliber and chambering has a sweet spot for bullet weight, speed, and bullet drop like 22-250 is 55g bullet weight, 222/223 50g, 6mm Rem and 243 win is 85g. 25-06 100g.

The ballistic advantage of matching bullet weight and speed in a caliber for flat trajectory is where I normally start. I look for a bullet weight and performance that best fits the game I am hunting. My favorites have always been nosler solid base, you could shoot a lighter bullet for better trajectory and get the same performance that you get with a heavier weight bullet.

The old Nosler solid base used to be my favorite, but when they went with ballistic tips they got too soft (IMO).

I find the Barnes copper bullets to be very dependable. Never got the original TSX to shoot well but had much better luck with the TTSX in 30-06, 300 Win Mag and in my 338-06. My 270 WSM likes the 129 grain Barnes LRX, which has a VG BC. I also like that they don't ruin as much meat as many conventional bullets. Was able to salvage a lot more backstrap from last years Buck shot with the 338-06 because of that.

 

[diver64]

Never heard a squib being a positive thing .

Ok. Reduced power load. Lol.

 

[WetBehindtheEar]

It has been too long since it’s seen the road
View attachment 1218468

Love it. Nice work!
I get a kick out of the papers on the bulletin board "flapping in the breeze".

 

[WetBehindtheEar]

Nice setup!

I should clean mine up a bit, here is #1 assistant
View attachment 1218856

Is she reloading for your lever gun? Just seeing the flat/round nose bullet is all.

 

[JimR]

Driving home last night the 68 started to shudder and stumble . Really had a hard time pulling any incline . This morning I checked it out . Did the pull the wire off the plug to see if it effects it . No difference in idle on number one or three plugs . Pulled them out to find this
View attachment 1219126
Center electrode burned out on both the rest of the plugs were good . Changed them out checked the timing it was dead nuts on . The plugs have about 1000 miles on them . And they are Motorcraft made in USA plugs . Little baffled to say the least

I don't think that I have ever seen a plug burned back that bad. It is definetly burning oil. I worked on cars and trucks for a living for 10 years back in 70's. Maybe the electrodes are made in China and the plugs assembled here. Time for some better spark plugs.

 

[SS396driver]

I don't think that I have ever seen a plug that bad. I worked on cars and trucks for a living for 10 years back in 70's. Maybe the electrodes are made in China and the plugs assembled here. Time for some better spark plugs.

Could be . Thinking I have a lean condition maybe a bad intake gasket . Not going to look too hard at it since I’m replacing the motor .
When I rebuild this one I’ll look at it closely to determine the cause

 

[JimR]

Yesterday's fun was more cleaning up of last years fallen trees. Picture one, dead Ash tree.


A few of you might remember this farm implement that I posted about in an Oak tree. Yesterday I cut the Oak down without destroying the implement. I cut a 1 1/2" v notch halfway into the tree in hopes that the tree would bounce off the stump when it came down. My plan worked perfectly. The tree jumped foward a few inches missing the iplement. All the brush got chipped up and the tree got bucked up. It now resides in my splitting pile.

 

[JimR]

That stump is now a nice seat. Trying to remove the rest of it is going to be a very time consuming project. I can't cut the stump off at the bottom without cutting the wheel.

 

[xraydaniel]

That stump is now a nice seat. Trying to remove the rest of it is going to be a very time consuming project. I can't cut the stump off at the bottom without cutting the wheel.

You got a nice slice of property Jim.


How’s everyone been?

 

[sean donato]

I don't reload these days, but everything has started to drop, hope that trend continues.

Wouldn't notice that at the grocery store. Today was my day off for veterans day, wife had off too, so we did our normal Saturday running around today. $482.57 at Walmart. This did include oil and filters for the truck, her car and the expedition. That was close to $100.00 by its self. The rest was groceries.
Dog food is still up there too. I can't wait till zade is over a year old and can eat the same food at zeke and ziva. $69.99 for a 47lb of puppy food. Just nuts.
Good news, I scored 2 full boxes of vented soffit for $2.00 per piece and 10 pieces of u channel for the same price. Grabbed a few electrical boxes and misc 90* conduit pieces, ta's and connectors for $5.00.

 

[benz66]

Wouldn't notice that at the grocery store. Today was my day off for veterans day, wife had off too, so we did our normal Saturday running around today. $482.57 at Walmart. This did include oil and filters for the truck, her car and the expedition. That was close to $100.00 by its self. The rest was groceries.
Dog food is still up there too. I can't wait till zade is over a year old and can eat the same food at zeke and ziva. $69.99 for a 47lb of puppy food. Just nuts.
Good news, I scored 2 full boxes of vented soffit for $2.00 per piece and 10 pieces of u channel for the same price. Grabbed a few electrical boxes and misc 90* conduit pieces, ta's and connectors for $5.00.

I drove by a grocery store on Nov. 1 in central Iowa. Big chain in the midwest. They had a banner that must have been 20' long and 6' high, proclaiming "new lower Prices." I thought I should stop and take a picture in case 45 became 47. Yes, I should have taken the picture.

I just bought BLSL chicken breast for $2.49/lb, Boneless Pork loin, 1.77/lb and country style ribs for 1.49/lb. I think the hamburger was 3.49. 12 oz. bacon, $2.00 This is on the gulf coast. Cheaper than a couple years ago. In the spring, they were selling boston butts for $.99/lb. LA based grocery chain. Beats the snot out of wally world.