Mastermind Meets The Echo CST-610EVL

[sawbones]

He's not the only one,

Here are mine.

In the mean time the sixt (a 600 EVL) followed me home.

Greetings from Holland

Jos

no way, that looks like a photo shop or a trick camera angle. name is bas acwards on the last bar too. :hmm3grin2orange:

 

[bonkelaar]

Trick from above

Look at the little differences i build in, took me a lot of effort. :msp_smile:

Thinking about a group picture of six but the table is under snow and maybe to short.

greetings from Holland

Jos.

 

[brokenbudget]

:waiting:

I'll post a picture of the new pistons in a day or two........we can have them reviewed next. :cool2:

 

[Mastermind]

:waiting:

Well I started getting everything together and realized the new seals and gaskets would be needed. I know.......I'm slack sometimes....

The case gasket is NLA but a set of seals will be here this week. We'll be putting it together first thing next week.

 

[jerrycmorrow]

that's what you say.

you gonna make a case gasket?

 

[Mastermind]

that's what you say.

you gonna make a case gasket?

I'll have to it seems.

Unless someone here has one.

 

[bonkelaar]

I'll have to it seems.

Unless someone here has one.

I should have the gaskets but it are very little pieces, easy to cut from what i remember rebuilding my CST 600 EVL.
I also have the base gaskets of the cylinders.

Once took over a whole box with new 610 parts from someone in the States. They now are in Europe.
Sending from holland cost time and people do not want to wait in this forum.

Greetings Jos.

 

[Mastermind]

I should have the gaskets but it are very little pieces, easy to cut from what i remember rebuilding my CST 600 EVL.
I also have the base gaskets of the cylinders.

Once took over a whole box with new 610 parts from someone in the States. They now are in Europe.
Sending from holland cost time and people do not want to wait in this forum.

Greetings Jos.

Yes the case gasket isn't a big deal. I have to make gaskets for vintage saws pretty regularly......on the case gasket I'm most concerned with thickness.

 

[bonkelaar]

Yes the case gasket isn't a big deal. I have to make gaskets for vintage saws pretty regularly......on the case gasket I'm most concerned with thickness.

I can measure if you want.

greetings Jos.

 

[Mastermind]

I can measure if you want.

greetings Jos.

Yes, please do.

 

[Majorpayne]

Yes, please do.

It is 3 little marks.

 

[bonkelaar]

Yes, please do.

Thickness is 0.40 mm or 1/64". Paper gasket.

Counted 7 sets of gaskets, part no. 100 242-1613 1. Can ship one.

The two little gaskets are connected.

Greetings from Holland

Jos.

 

[Mastermind]

Thickness is 0.40 mm or 1/64". Paper gasket.

Counted 7 sets of gaskets, part no. 100 242-1613 1. Can ship one.

The two little gaskets are connected.

Greetings from Holland

Jos.

PM sent

 

[mt.stalker]

bonkelaar :yourock:
Randy

So many good folks on this site is heartwarming. It's outstanding to see the cooperation/care/helping of bretheren worldwide , via the internet . We can make this Earth , a better place . :wave:

 

[Naked Arborist]

I do hope you had him send 2 sets. Someone is bound to need them eventually or maybe last week :msp_tongue:

 

[barneyrb]

I just have one question, when is the ETA for having a running and ported Echo Echo Echo Echo twin?

 

[Warped5]

I just have one question, when is the ETA for having a running and ported Echo Echo Echo Echo twin?

:agree2:​

 

[deye223]

page 90 :go:

 

[timmcat]

PM sent 1/24/03 so we should have some action by 2/24/03 hopefully, right?

 

[REJ2]

PM sent 1/24/03 so we should have some action by 2/24/03 hopefully, right?

The next available 03 is ninety years from now:msp_scared: