Mastermind Meets The MS241 C-M

[Gologit]

*laughs* I figured since he said he was already going to make a new thread I would put it back up on top, whatever the content was. MeaCulpa.

Noted. And remembered.

 

[wyk]

Nice try. Isn't it aggravating when a group goes roaring through your thread and completely derails it? Aggravating indeed.

I'll move the car posts to the car section.

No offense, but WHAT thread? This thread never had anything to do with porting a 241 and Randy's already admitted this thread never will...

 

[Gologit]

No offense, but WHAT thread? This thread never had anything to do with porting a 241 and Randy's already admitted this thread never will...

And your point is?

 

[wyk]

And your point is?

Fairly clear, I thought. But there's no accounting for some folks

In any case, it looks like Randy may have gone the way of Bradly here. It's all turned in to advertising. That's OK, he pays his dues to AS, anyways. I wish all you guys luck. I hope maybe some day that we see a 241 porting thread. I think that would be cool.

 

[russhd1997]

Fairly clear, I thought. But there's no accounting for some folks

In any case, it looks like Randy may have gone the way of Bradly here. It's all turned in to advertising. That's OK, he pays his dues to AS, anyways. I wish all you guys luck. I hope maybe some day that we see a 241 porting thread. I think that would be cool.

It will happen. Randy is a busy guy and puts the saws the people make a living with at the front of the line. It took more than 60 pages of BS before we saw a video of the EVL 610 in some wood. I like the BS myself! :msp_wink:

 

[nmurph]

...As for the little Stihl, its a fat baby, but hey, it has a great air filter...

Sort of Stihl's MO of late.

...My Makita DCS401 weighs 10.5# with 14" B&C. I'll have to drain one of them to see what they weigh without fluids, B&C...

401s are 9lb 2oz.

I remember Randy stating he was working on one a couple of years ago. I would like to hear how that turned out.

It will happen. Randy is a busy guy and puts the saws the people make a living with at the front of the line. It took more than 60 pages of BS before we saw a video of the EVL 610 in some wood. I like the BS myself! :msp_wink:

There's a vid of it cutting wood? Who'd a thunk it. The last thing I saw was Jon standing in a doorway, blipping the throttle like some kind of voyeur just wishing he could cut something with it.

 

[russhd1997]

There's a vid of it cutting wood? Who'd a thunk it. The last thing I saw was Jon standing in a doorway, blipping the throttle like some kind of voyeur just wishing he could cut something with it.

When Jon was blipping the throttle he was just doing his impression and teasing us. It went up against a Husky and beat it in the wood cutting video which is in the vicinity of page 60. :msp_smile:

 

[7sleeper]

Nice try. Isn't it aggravating when a group goes roaring through your thread and completely derails it? Aggravating indeed.

I'll move the car posts to the car section.

I actualy have the impression that this guy, I think his name is something like Randy, is trying to derail a perfectly good thread by showing a chainsaw, I mean this is really annoying! Somebody should say something so that it never happens again!















7

 

[bennn*e]

The new price with cashback looks like it will be very close actually.

When I last calulated it its actually cheaper here with the new RRP and the bonus bucks :msp_biggrin:

 

[deye223]

When I last calulated it its actually cheaper here with the new RRP and the bonus bucks :msp_biggrin:

bennn*e the last time they had the bonus bucks the local dealer told me son that he wasn't participating ????

i'll go and see tomorrow

 

[FATGUY]

opcorn:

 

[DSS]

opcorn:

Don't be hogging all the snacks

 

[excess650]

Don't be hogging all the snacks

He's just trying to maintain his girlish figure!

 

[FATGUY]

Don't be hogging all the snacks

I feel shame:msp_sad:

 

[DSS]

I feel shame:msp_sad:

Its ok brody. We don't hate you cause you is the sexiest biotch here. And stuff

 

[SawTroll]

I fail to see the need for the new breed of 42/43cc pro saws, as the weight is far too close to some 50cc saws, and the power is nowhere close. opcorn:

 

[DSS]

I fail to see the need for the new breed of 42/43cc pro saws, as the weight is far too close to some 50cc saws, and the power is nowhere close. opcorn:

I didn't think you noticed things like that Niko.

 

[Stihl Livin]

Come on niko it's the m tropic that makes it worth while

 

[Currently]

I fail to see the need for the new breed of 42/43cc pro saws, as the weight is far too close to some 50cc saws, and the power is nowhere close. opcorn:

I took care of that power to weight issue by meeting this ole Tennessee redneck and giving him a little money.

Could of sworn I saw buzzards in the trees, heard a little banjo music and some squealing in the distance. Needless to say, I tread very carefully there. :hmm3grin2orange:

I think I can now hold my own against any stock husky out there unless the owner has a big peepee and then I'll just let him win!

 

[FATGUY]

I fail to see the need for the new breed of 42/43cc pro saws, as the weight is far too close to some 50cc saws, and the power is nowhere close. opcorn:

need? who said anything about need? I just love the idea of a tiny saw with a big bite. I bet Randy gets that saw right on the heels of the 50cc saws.