MidWest SawFest IA MO spring GTG

[Homelite410]

111 I think Kenneth.

 

[jonsered raket]

Its a 111s, dont worry i have a mint runner for show. They look great together.

Sent from my N9100 using Tapatalk

 

[hoskvarna]

Its a 111s, dont worry i have a mint runner for show. They look great together.

Sent from my N9100 using Tapatalk

sweet
did the alchy one run?

 

[sarahdodgegeek]

Anyone else need one of the cutting cancer shirts? Bumpity bump! I'm trying to get a 1st run going in time for Midwest sawfest, will do another later if there's more interest...

Sent from north of hwy 8

 

[Mo. Jim]

Morning folks, rained here last night and this morning, 63 degrees last night, going to 33 tonight with a chance of snow. 14 days and countinghope every one has a good day.

 

[hoskvarna]

We got round 3in rain. 81 degrees Saturday , then 30 this am and grass all white ------ snow. Hope it's not this way in 2weeks.


Sent from my iPhone using Tapatalk 2

 

[Mo. Jim]

We got round 3in rain. 81 degrees Saturday , then 30 this am and grass all white ------ snow. Hope it's not this way in 2weeks.


Sent from my iPhone using Tapatalk 2

Morning Mark, it's same here, 30 and snow and 30 mph winds.

 

[sarahdodgegeek]

It's headed our way tonight...

Sent from north of hwy 8

 

[sam-tip]

Anyone bringing a 020 076 090 to swap trade sell at the gtg. Are we still going to use red tags or ribbons for swap trade sell?

Sent from my SCH-R950 using Tapatalk

 

[Mo. Jim]

Anyone bringing a 020 076 090 to swap trade sell at the gtg. Are we still going to use red tags or ribbons for swap trade sell?

Sent from my SCH-R950 using Tapatalk

Doug, I have several 020's and parts, but I know I would have to go through the fuel systems as they have been stored forever. I have 30 days of work to get done in 9 days, before I head North.

 

[sam-tip]

Jim

I think my friend wants the old saws for display more than use. Sounds perfect.

 

[Oliver1655]

Will there be anyone selling chainsaw oriented ball caps? I would be interested in purchasing some if they do. I would rather have the brand colored vs camo.

 

[heimannm]

You folks have all been very busy and I have hardly been at home this year. I will be taking next week off to try and get my shop back in shape and maybe get a few saws ready. I have not heard back from Terry Ives for a while so I don't think the 101AA will be back. I will have to make due with the clapped out MAC40 once again.

Looking forward to seeing everyone again.

While I am thinking about it, I have an older low speed bench grinder, a couple of (stationary type) belt sanders and several old electric (washing machine type) motors if anyone is interested. Just let me know and I will bring them along. I have a few old (non McCulloch) saws and stuff for anyone looking for something a bit different to take home.

Lastly, if anyone have access to a plasma cutter, I have a number of pieces of 11 gauge SS about 12" x 18". All of the preceding bits (except for the Mac40 saw) are your for the taking.

Mark

 

[hoskvarna]

well guys ,some bad news.
the blockbuster processor will not be at gtg.
it has had some backorders on parts and wont be done till middle of may
we tried but no go.

 

[Homelite410]

I'd be interested in a washing machine motor or 2!

 

[srcarr52]

You folks have all been very busy and I have hardly been at home this year. I will be taking next week off to try and get my shop back in shape and maybe get a few saws ready. I have not heard back from Terry Ives for a while so I don't think the 101AA will be back. I will have to make due with the clapped out MAC40 once again.

Looking forward to seeing everyone again.

While I am thinking about it, I have an older low speed bench grinder, a couple of (stationary type) belt sanders and several old electric (washing machine type) motors if anyone is interested. Just let me know and I will bring them along. I have a few old (non McCulloch) saws and stuff for anyone looking for something a bit different to take home.

Lastly, if anyone have access to a plasma cutter, I have a number of pieces of 11 gauge SS about 12" x 18". All of the preceding bits (except for the Mac40 saw) are your for the taking.

Mark

I'm interested in the grinders and belt sanders.
Could plasma cut some stuff or CNC it out in the mill.

 

[heimannm]

I will plan on bringing the whole lot, whatever goes unclaimed becomes the property of the GTG sponsors...

Mark

 

[jonsered raket]

Cant wait for the warm iowa sun lol this snow is crushing our spirits up here!

Sent from my N9100 using Tapatalk

 

[Time's Standing Stihl]

hey guys...I noticed on the first page it says the GTG is the weekend of April 26. I skimmed thru a bit, but 47 pages would take me all day, is it still scheduled for that weekend? If so, im S.O.L....my weekend to work

 

[Homelite410]

hey guys...I noticed on the first page it says the GTG is the weekend of April 26. I skimmed thru a bit, but 47 pages would take me all day, is it still scheduled for that weekend? If so, im S.O.L....my weekend to work

Yes it is April 26.