Modding The MS200T

[Roll Tide]

They ain't got feelings David.......

......have you seen the prices they charge? :msp_scared:

I have, but they are people too .:msp_biggrin:

 

[Mastermind]

I have, but they are people too .:msp_biggrin:

Well......good night to you Sir!!!!! :msp_angry:

 

[garyischofield]

They ain't got feelings David.......

......have you seen the prices they charge? :msp_scared:

Stihlers or stealers?Just funnnin'.:taped::msp_smile:

 

[garyischofield]

16,926 posts?

Now Steven you know me better than that. I'm as busy as a one armed paper hanger, but when them filters get here you'll all see the 200T in action.

Somebody has been A.flapping their gums B.enlightening us Cretans about the finer points of saw modification C. tormenting the AS general populace, aka, spreading love and joy?It's a good thing you don't have 20,000 posts, you wouldn't be able to take those extended vacations.I'm sure keeping the miscreants on "the other swap thread" is a full time job.:msp_wink:

 

[deye223]

I would melt ya know. :msp_biggrin:

yall no he's so SWEET he's made of suger :byebye:

 

[Mastermind]

Tuned to 14,300 with the mesh filter. 16" B&C

[video=youtube_share;LCKmcItcFdw]http://youtu.be/LCKmcItcFdw[/video]

 

[bryanr2]

Holy ####!:msp_w00t:

 

[lone wolf]

Nice work, man you are going to go deaf! Did you time it in the same log before modding? How many more rpm did you get from the good filter?

 

[Mastermind]

Nice work, man you are going to go deaf! Did you time it in the same log before modding? How many more rpm did you get from the good filter?

What did you say????? I can't hear to well.



It was in need of repair when I got it so no before video.

It will easily rev to 15,500 with the mesh filter but it makes the best power at 14,300 or so.

 

[Zombiechopper]

What did you say????? I can't hear to well.



It was in need of repair when I got it so no before video.

It will easily rev to 15,500 with the mesh filter but it makes the best power at 14,300 or so.

that coincides with my experiences with stock 200t's. I think they cut the best tuned at around 13,800 even though they can safely be tuned leaner.

which new carb went into this saw? Accel pump version?

I should get you to port a couple of mine. Then I could sell all my bigger saws nice work.

 

[Mastermind]

that coincides with my experiences with stock 200t's. I think they cut the best tuned at around 13,800 even though they can safely be tuned leaner.

which new carb went into this saw? Accel pump version?

I should get you to port a couple of mine. Then I could sell all my bigger saws nice work.

I need to get the number off the box......I just told the dealer, "I need a 200T carb". :msp_wink:

 

[WKEND LUMBERJAK]

Tuned to 14,300 with the mesh filter. 16" B&C

[video=youtube_share;LCKmcItcFdw]http://youtu.be/LCKmcItcFdw[/video]

That is a nice running saw

 

[Mastermind]

That is a nice running saw

I was a little concerned that starting it might be a pain with 190psi.....but I don't see any problem at all.

 

[garyischofield]

heman

I was a little concerned that starting it might be a pain with 190psi.....but I don't see any problem at all.

For you no problemo.For us average types that will need a decomp.:msp_wink:Great work as usual.That things a little tiger!

 

[Mastermind]

For you no problemo.For us average types that will need a decomp.:msp_wink:Great work as usual.That things a little tiger!

You big brute. :msp_w00t:

 

[3000 FPS]

Very Impressive with a 16" bar. I know it is pine but it cut PDF with the bar buried in it, and all that from a little top handle saw. Like all the work I have seen you post it is outstanding.

 

[Iron Head]

That's crazy cutting power for such a little saw.
Now lets see the 201.

 

[Zombiechopper]

That's crazy cutting power for such a little saw.
Now lets see the 201.

it's in the other thread. 200T is still the king. Although Randy didn't port the 201, just increased compression and advanced timing. I have no idea how you could port that jug. from the pics it looks really tiny in there.

 

[046]

190 psi... very impressive power!

 

[lone wolf]

I need to get the number off the box......I just told the dealer, "I need a 200T carb". :msp_wink:

1129 120 0653 is the latest improved carb I believe.


http://www.arboristsite.com/chainsaw/111008.htm#post1752506