More 028AV oiler questions

whatsnext · Mar 4, 2006

I tore the clutch side down today and this is what I found. So, is the nylon ring that slides over the drive sprocket supposed to have teeth on it or is it missing other pieces? It kind of suprised me that this saw has a clutch drum driven oil pump.
Thanks, John...

sugarbush · Mar 4, 2006

whatsnext said:
I tore the clutch side down today and this is what I found. So, is the nylon ring that slides over the drive sprocket supposed to have teeth on it or is it missing other pieces? It kind of suprised me that this saw has a clutch drum driven oil pump.
Thanks, John...

Get the change over kit for a rim sprocket.

Lakeside53 · Mar 4, 2006

whatsnext said:
I tore the clutch side down today and this is what I found. So, is the nylon ring that slides over the drive sprocket supposed to have teeth on it or is it missing other pieces? It kind of suprised me that this saw has a clutch drum driven oil pump.
Thanks, John...

Sure is... you need 1118 642 1506, list for about $4.75...

sugarbush · Mar 4, 2006

whatsnext said:
I tore the clutch side down today and this is what I found. So, is the nylon ring that slides over the drive sprocket supposed to have teeth on it or is it missing other pieces? It kind of suprised me that this saw has a clutch drum driven oil pump.
Thanks, John...

Looked at your part's again and look's like the teeth on pump gear are worn done some. If so you'll have to replace it. Also don't just replace the plastic gear on the drum, get the change over kit. $15.45. much better system.

whatsnext · Mar 5, 2006

sugarbush said:
Looked at your part's again and look's like the teeth on pump gear are worn done some. If so you'll have to replace it. Also don't just replace the plastic gear on the drum, get the change over kit. $15.45. much better system.

Sugarbush, Do you have the part number for this kit?
Thanks, John

sugarbush · Mar 5, 2006

whatsnext said:
Sugarbush, Do you have the part number for this kit?
Thanks, John

Go to any local saw shop and they should be able to get the kit. my part # may not help you, if you have a problem getting it , I can ship, but you should deal local if possible.