Sold MS 441 Woods Ported

[MillerModSaws]

I have a nice 441 PHO I would like to sell or possibly trade for the right saw. This saw has been ported and runs very nicely. I put new caber rings in it when I ported it. Any questions feel free to ask. Saw is a little dirty as I have ran a few tanks of gas threw it since I got it modded. I will make sure it's cleaned up and drained before shipment. Ty. $675 Shipped pho. PayPal f&f or add 3%

 

[MillerModSaws]

Couple more pics.

 

[stihl for life]

question do you have any pics of your work ?

 

[MillerModSaws]

I'll see what I can find most of my work was on my old phone and I just smoked it but I should have some of others saws. If your truly interested I have no problems tearing down the saw to show you the work or give u the numbers I put in it or what all I did.

 

[MillerModSaws]

Here's a cylinder I have cut the squish band and base

 

[MillerModSaws]

Here's a roughed in transfer and intake pic

 

[stihl for life]

that work looks good and i will think about this one

 

[MillerModSaws]

Roughed in exhaust. Remember these are of my work not this saw. I don't think I have any finished pics but I can get ya an idea.

 

[stihl for life]

do you just do your own saws or would you like geting into porting more?

 

[MillerModSaws]

I do chainsaw repair and porting now in my area. Out of my garage as a side job. But i would like to have more business and build a reputation for myself. And actually when I get this saw sold I'm going to sell my porting tools and buy some nicer cc speciality ones. I have to more saws I will be posting next week. I like to run several yanks of gas threw them before I sell them. Just to make sure I have any bugs worked out of them.

 

[stihl for life]

well i may have some work for ya in the future . i will keep you posted . i like your thinking

 

[fastLeo151]

What numbers did you use on this saw

 

[MillerModSaws]

Ty. And any opportunities would be appriciated!

 

[MillerModSaws]

What numbers did you use on this saw

Give me a couple minutes and I'll grab my notes.

 

[MillerModSaws]

What numbers did you use on this saw

I took .047" off the squish. Exhaust at 100°, intake 125°, the intake ended up at 80°. Final squish was .024" and advanced the timing about 6°

 

[calee]

Interested in a 200 T, good running saw, in trade?

 

[MillerModSaws]

Interested in a 200 T, good running saw, in trade?

Pm me pics I'll consider it. Ty

 

[XSKIER]

Great saw, sweet deal!

 

[MillerModSaws]

I want to thank everyone that has made offers but I wanna narrow it down a bit. I would mainly be interested in 60- 70cc saws. Runners or not as long as there in good shape.

 

[stihl for life]

I got a nice saw for ya
Ported 372? Lmao