My pile of big Mcculloch's finally came in w PICS!

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

hkusp9

ArboristSite Operative
Joined
Jun 22, 2012
Messages
384
Reaction score
17
Location
Houston, Tx
please pay close attention to the "CP125's" as i dont think the sell knew what he had. I THINK they're actually 797's? One a direct drive and the other a gear drive???

B6D34EEB-C982-42C9-AD3A-2CE15D8DE941-2854-0000055F9631AABA.jpg

97AB8B09-6060-4780-AAC5-B620D8A04444-2854-0000055F801E1D6C.jpg

E6C74995-2324-4BE2-8F37-3C10B46A4578-2854-0000055F7703947D.jpg

FD101C5E-BFE0-426B-8CD1-1CEDF31952A4-2854-0000055FCB7C5C18.jpg

C4CE4BDB-DD2A-4C97-8D70-C73E4113033D-2854-0000055FE7A9E67D.jpg

EB9021EB-6473-4FB6-9871-8FBCC97A3CA3-2854-0000055FF4CA7EC1.jpg

F16B7A96-79D5-4959-BBC7-70C7EFCDB0F6-2854-0000055FA7755FE2.jpg

04F41E0C-3DF1-4A28-A8C6-0B2046A01919-2854-0000055FDA4E660A.jpg
 
I dont see a cp or a 797 anywhere. :monkey:

Heck Ric if you are seeing anything that would be more than me.:smile2:

Darn internet filters:mad2:they won't let much of anything through


The embedded images, & the Photobucket album (no, I didn't look at all 290+ images :msp_ohmy:), are showing just fine here.

Hkusp9, what is the overall condition of the saws? A few appear to have been out in the weather for a quite a while; I'm hoping that you didn't receive a bunch of 'parts only' saws.

BTW, I've been tempted to call the guy down in Misquitoville.
 
I dont see a cp or a 797 anywhere. :monkey:

Honestly i dont know what the hell i have here, i was mostly in this buy for the 125c which does appear to be in good, runnable condition.

Alot of the other ones are pretty bad banged up, missing parts, ugly.

They were all garage stored but that doesnt mean much considering the condition of some of them.
 
If you decide to let the Homelite 1050 go I'd be interested.

And I'd be interested in the CP55 hulk and the other CP70 lookin' 10-series carcass. Same with the gear drive hulk that's missing the starter, next to the C-52 Homelite (or maybe the other gear drive, that's next to the 3-25). Neither has an AO pump, so my guess is they're 1-80 series saws or similar. Good parts there for me...
 
Last edited:
And I'd be interested in the CP55 hulk and the other CP70 lookin' 10-series carcass. Same with the gear drive that's missing the starter, next to the C-52 Homelite. Doesn't have an AO pump, so my guess is that it's a 1-86. Good parts there for me...

Vultures I tell you, the mans camera isn't even cold!
 
Great score. I also don't see any 797's or CP125's.
I would like to see some better pic's of the 1050.
The gear drive appears to be a 1-85, 1-86 or maybe
an 840.
You'll be busy for a bit.





Lee
 
Great score. I also don't see any 797's or CP125's.
I would like to see some better pic's of the 1050.
The gear drive appears to be a 1-85, 1-86 or maybe
an 840.
You'll be busy for a bit.


Lee

I would have to agree with Lee on the geardrive being a 1-86. The fully coated wrap handle is a good indication.

Chris.
 

Latest posts

Back
Top