Mystery Chainsaw

[julian1234]

Hello all, came across this echo in my garage...

The model number has been pulled off and I can't seem to figure out what it is

What model is it?

Is it in high demand?

What Year?

What's it worth?

See attached photos:

View attachment 20240716101436_IMG_3994.jpg
View attachment 20240716101312_IMG_3989.jpg

 

[julian1234]

**Bump**

 

[J D]

Looks like CS‐4500/CS-4600/CS-5000

 

[wcorey]

CS-5500 maybe

 

[julian1234]

*Bump*

 

[J D]

Have you investigated whether it is one of the suggested saws?
There should be a manufacturers plate below the bar mount underneath the clutch cover. If thats not there you will probably have to pull the muffler to measure the bore if you want to know exactly what it is.

 

[oldbuzzard]

**Bump**

What the hell is this “bump” thing?

 

[coffeebrk]

My new generator runs on gas and propane

 

[Sidecarflip]

My new generator runs on gas and propane

What the hell does that have to do with the chainsaw? Inquiring minds want to know????

Found in garage tucked away. Bet it's full of coagulated gas as well and probably a very dull chain. It's an Eco for sure. Easy to tell by the toggle off-on kill switch. Echo loves the toggle switches even though I'm not overly fond of them. I much prefer Stihl's integrated kill switch arrangement but then I divorced myself from Stihl and went with Echo, 2 years ago.

 

[julian1234]

Could it be a cs 6700?

 

[ElevatorGuy]

What the hell is this “bump” thing?

Something he does is every post. Annoying isn’t it?

 

[J D]

Could it be a cs 6700?

6700 has a manual overide for bar oil... doesn't look like yours has that

 

[telecasterfool]

It is a 6700, 5500 (these two are same size) 4500 or 4000 (these two same size) Please tell us if there are any plastic parts, such as clutch cover, or rear handle. Echo had 4600s and 5500s that had plastic subsequent to the magnesium models. If you post a picture of a tape measure somewhere on the saw, I'll tell you what model. I have all the listed models here.

 

[epo]

Pictured below is CS-5500.

 

[coffeebrk]

What the hell does that have to do with the chainsaw? Inquiring minds want to know????

1. My mind wonders
2. Generators are cool
3. I posted it because...ahhhh. back up to #1

 

[redray46]

Have you investigated whether it is one of the suggested saws?
There should be a manufacturers plate below the bar mount underneath the clutch cover. If thats not there you will probably have to pull the muffler to measure the bore if you want to know exactly what it is.

Have you checked for the serial/ model number plate inner the clutch cover. It is not a 67 or 68 series, no manual oiler or spring mounted AF cover .

 

[julian1234]

The piston bore on it is 45mm. It appears to be a cs-5500?

 

[Shaunzo]

Hello all, came across this echo in my garage...

The model number has been pulled off and I can't seem to figure out what it is

What model is it?

Is it in high demand?

What Year?

What's it worth?

See attached photos:

View attachment 1190992View attachment 1190993
View attachment 1190991View attachment 1190990

It’s def not a 4500

 

[BeatCJ]

What the hell is this “bump” thing?

If a thread doesn't get any replies on a higher volume forum, it's a way to bring it back to the front page. Common etiquette is that you only do it to move it back to the front. It demonstrates a lack of patience, otherwise. Many places also say you shouldn't bump your own thread.

 

[EchoShindaiwaMakitaDolmar]

I like bicycles.