Need Ignition module 056

[huskydave]

I need to find a module for my magII. The only one I can find is ts350 on ebay with an as is in the writeup for 36 bucks. Does anyone have an ignition module? or have a link to a website where I can buy one for a reasonable amount of money. Any help would be appreciated. I need it shipped to canada as well. Stihl wants 130.00 new. Ouch. Their is a parts saw on ebay for 20 bucks that says it has spark but all I need is the module.

 

[Lakeside53]

Exacty which one do you need?

- points based
- Bosch based (two piece flywheel/fan wheel)
- SEM based (solid case flywheel)


You cannot swap SEM and Bosch unless you change out the flywheels. The TS350 flywheel does not fit.. you need the SEM 056 flywheel if you use the TS350 igniton module. Many TS350's have points, so be careful which one you buy.

 

[huskydave]

I am having a hard time finding one. I Read somewhere dozer dan may have 056 parts. I need sem one piece module or a ts350 cutoff saw module, those will also work. Everytime I track one down they won't ship north. I could buy new but that is expensive. My flywheel is good its sem I had to make a puller for it at work I used a hydraulic fitting that had the right thread and clamped that in a vise and popped her off with a pin punch to the crank. My stihl dealer didn't have the right puller.

 

[Lakeside53]

They are hard to find.. but there are literally zillions of dead late model TS350 (and 360) saws out here with good modules... I'll dig around... but keep looking! If you find one and the guy won't ship to CA, have him ship it to me and I'll send it to you.

 

[huskydave]

Thanks Lakeside I will try to find a good one. I may go down to the city and see if they have any ts350's with blown pistons and maybe I will get lucky. I can't believe they want $200.00 and change Canadian that seems a bit steep even for a new one. I may just buy a cheap parts saw off ebay I don't mind doing that at least I will get some spare parts for the extra cash.