Need Parts for a Homelite 3100G auto.

[dcampb06]

I am trying to resurrect a saw which was once a basket case. I have it running but am missing the cowling which covers the head. There are also apparently two clips which are part of the compression release. I have a parts book coming which I found on line so I may be able to provide part numbers and or better descriptions later.

Thanks for your reply

 

[ray benson]

Hi
Not sure if those parts are used on other saws. The cylinder shield is part # A-68121. The 2 clips for the compression release are ; Clamp-upper #65754-1 and Clamp-lower # 65755-1. Haven't run across an online IPL for the saw.

 

[Bill G]

I am glad to see another 3100G around. I have a few of them. The parts you need are the same on the 2100 and 3100. I will try to attach a page from the 3100 IPL. The file size may be a bit big.

Bill

 

[Bill G]

Here are a few Homelite 3100G saws. They are nice saws but chains are always a problem. The saws pictured with 48" and 30" bars are both running 1/2" full chisel chain. The short bar saw is running 3/8''.

Bill

 

[aquan8tor]

saw one on ebay last night. Still has over 3 days left on auction. Thought it might help...
Edit: post makes a lot more sense when I put the link in. sheesh.


http://search.ebay.com/search/searc...r=1&from=R8&satitle=homelite+3100g&category0=