Greg Carberry
ArboristSite Operative
Need whole top end piston, cyl and rubber handle mounts for Partner R17 55 cc's. Others might fit too like R16 etc.
Need parts for Partner saw
- Thread starter Greg Carberry
- Start date
Help Support Arborist Forum:
tony marks
Addicted to ArboristSite
got an partner 65 out in the
storage building some where.
not running. if u email ,im getting so much spam ,i mite miss it, so let me know here and ill look for it.
storage building some where.
not running. if u email ,im getting so much spam ,i mite miss it, so let me know here and ill look for it.
Greg Carberry
ArboristSite Operative
Tony,
Let me know how much you want for it I may be interested. Does it run/cut good?
Let me know how much you want for it I may be interested. Does it run/cut good?
tony marks
Addicted to ArboristSite
partner
hey bud, the saw dont run.
its got a lot o pts that are alrite ,i would guess . it was a lean siezure so
i just put it up. u pay shipping and say 5 bucks for my gas and ill send it your way,
when i get time. this rain got me hoppin.. thanks tm.
hey bud, the saw dont run.
its got a lot o pts that are alrite ,i would guess . it was a lean siezure so
i just put it up. u pay shipping and say 5 bucks for my gas and ill send it your way,
when i get time. this rain got me hoppin.. thanks tm.
Greg Carberry
ArboristSite Operative
hmmm...hows the handles on it? my rear handle is cracked sounds like a good deal though I already got a seized up one. really need a good top end for mine. I'll give it some thought, my zip is 15825 let me know how much to ship.
tony marks
Addicted to ArboristSite
i pulled it out yesterday,just to look.
dont believe i could say, its worth foolin with. sorry to bother u . later now
dont believe i could say, its worth foolin with. sorry to bother u . later now
<p>Pioneer-<p/>
<p>If you can get me part numbers for the parts you need for your Partner, I can probably help you out. We have two big boxes of Partner/Pioneer parts at my shop but I have no parts diagrams or manuals to go by, just part numbers on the packaging of individual parts. Most of the stuff is for Pioneer P-62/Poulan P-655, Poulan SD25A, and small Partner saws. There is a little bit of Poulan Pro 475 parts as well. Thanks, JJ<p/>
<p>If you can get me part numbers for the parts you need for your Partner, I can probably help you out. We have two big boxes of Partner/Pioneer parts at my shop but I have no parts diagrams or manuals to go by, just part numbers on the packaging of individual parts. Most of the stuff is for Pioneer P-62/Poulan P-655, Poulan SD25A, and small Partner saws. There is a little bit of Poulan Pro 475 parts as well. Thanks, JJ<p/>
Mike Acres
ArboristSite Operative
I have new aftermarket cylinders 65cc that will fit. Should also have the parts for the rear handle.
Cylinder cost $175.00 Cdn plus shipping
Mike
Cylinder cost $175.00 Cdn plus shipping
Mike
Greg Carberry
ArboristSite Operative
Jacob,
I don't have any part numbers for the Partner. I guess I could take some pictures of what I have and send them to you. I might have use for you Pioneer parts sometime though. Have all part numbers for them.
Mike,
Does that include a piston kit as well?
Not sure what I'm doing with this saw yet may not be worth fixing.
I don't have any part numbers for the Partner. I guess I could take some pictures of what I have and send them to you. I might have use for you Pioneer parts sometime though. Have all part numbers for them.
Mike,
Does that include a piston kit as well?
Not sure what I'm doing with this saw yet may not be worth fixing.
Mike Acres
ArboristSite Operative
The kit consists of cylinder, piston, piston rings, wrist pin and wrist pin retainers.
I would also have a gasket set to fit that series of saw.
I would also have a gasket set to fit that series of saw.
<p>Pioneer-<p/>
<p>We have about 100,000 parts for Poulan P-405, 455 Pro, 475, 505, 605, 655, Pioneer P-41/42, P-51, P-60/61,62, Poulan small saws like the S-25DA, and Partner 45/50/55s. We also have a pile of used parts and carcasses for the same models that is about the size of a large U-haul truck. This logging company I contract for bought a Poulan/Pioneer dealership in 1983 and is getting rid of everything. Mike, do you possibly have access to Aplina chainsaws and parts? I am looking for Alpina Forest 120s and pro 90s. Thanks, JJ<p/>
<p>We have about 100,000 parts for Poulan P-405, 455 Pro, 475, 505, 605, 655, Pioneer P-41/42, P-51, P-60/61,62, Poulan small saws like the S-25DA, and Partner 45/50/55s. We also have a pile of used parts and carcasses for the same models that is about the size of a large U-haul truck. This logging company I contract for bought a Poulan/Pioneer dealership in 1983 and is getting rid of everything. Mike, do you possibly have access to Aplina chainsaws and parts? I am looking for Alpina Forest 120s and pro 90s. Thanks, JJ<p/>
Mike Acres
ArboristSite Operative
Jacob:
I sent you a personal email about Alpina parts
I sent you a personal email about Alpina parts
Poulan Pro 405
Jacob and Mike,
I sent you both emails offline, but I thought I'd go ahead and post here also. I've got a PP 405 that has a scored cylinder, the local shop won't work on it, and I've not been able to find a cylinder kit anywhere. Do either of you still have these available? I'l love to get that saw going again. That was my alaska sawmill saw, so I've got rip chains, etc for it already.
Thanks,
Carson Duke
Jacob and Mike,
I sent you both emails offline, but I thought I'd go ahead and post here also. I've got a PP 405 that has a scored cylinder, the local shop won't work on it, and I've not been able to find a cylinder kit anywhere. Do either of you still have these available? I'l love to get that saw going again. That was my alaska sawmill saw, so I've got rip chains, etc for it already.
Thanks,
Carson Duke
Mange
Addicted to ArboristSite
The R16 has a different rear handle than 17, 18, 22, 522.
I too have a bunch of parts (used), but the shipping is not great.....
I too have a bunch of parts (used), but the shipping is not great.....
retoocs555
Addicted to ArboristSite
I have 2 R16s. Complete running working saws. An R19, again complete running saw. I probably have a top end too, but although unscored, it isn't tested. I may be able to find just the rubber mount for you too. Sent a PM earlier today if you still need any of this stuff.
miketwofeathers
New Member
Jacob J. said:
i would be interested in a poulan pro 655 for parts! i let my neighbor use mine and he dropped a tree on it
i need the handle and a gas tank. saw seems ok, i put a little fuel in it and it started and ran fine till it ran out of fuel! any help is very much appreciated. mike
