Nik's Poulan Thread

[80sDweeb]

Wow, you guys have really infected my brain (with CAD?)! I'm going to look at a Super 380 this afternoon, Craiglist ad find, asking $60. Ad shows blurry pics, which I like if it means the saw doesn't sell before I can see it. This one was posted yesterday, but I saw it late last night, so I thought I might be too late. Nope, meeting the guy after he gets out of work.

From the ad (and all I know about the saw):
"When it runs, it runs Great! It mite need some tuning up! Has a 21" bar/chain, and the chain is new. the bar oil and blade protector are included! as pictured."

Wish me luck!

Scott in Penfield NY

 

[OhioGregg]

Wow, you guys have really infected my brain (with CAD?)! I'm going to look at a Super 380 this afternoon, Craiglist ad find, asking $60. Ad shows blurry pics, which I like if it means the saw doesn't sell before I can see it. This one was posted yesterday, but I saw it late last night, so I thought I might be too late. Nope, meeting the guy after he gets out of work.

From the ad (and all I know about the saw):
"When it runs, it runs Great! It mite need some tuning up! Has a 21" bar/chain, and the chain is new. the bar oil and blade protector are included! as pictured."

Wish me luck!

Scott in Penfield NY

I think I would bite on that one... I see its missing the gasket between the air filter cover & top cover. But, you are right, its tough to see things in the blurry pics. Kinda makes me dizzy.

They are great saws, even if you have to put a little work and, or money into them.

Gregg,

 

[Eccentric]

I'd grab it for that.

 

[RedneckChainsawRepair]

I'd grab it for that.

I wouldnt even try to start for that price. I would just walk up hand the man his 60 and say Thanks.

Hope the OP got it.

Aaron did you dive off the board for that 100dollar BB3750? Me and another was scared to.

 

[Eccentric]

I wouldnt even try to start for that price. I would just walk up hand the man his 60 and say Thanks.

Hope the OP got it.

Aaron did you dive off the board for that 100dollar BB3750? Me and another was scared to.

No I didn't. I trust the instincts of my friends.

 

[rocketnorton]

Wow, you guys have really infected my brain (with CAD?)! I'm going to look at a Super 380 this afternoon, Craiglist ad find, asking $60. Ad shows blurry pics, which I like if it means the saw doesn't sell before I can see it. This one was posted yesterday, but I saw it late last night, so I thought I might be too late. Nope, meeting the guy after he gets out of work.

From the ad (and all I know about the saw):
"When it runs, it runs Great! It mite need some tuning up! Has a 21" bar/chain, and the chain is new. the bar oil and blade protector are included! as pictured."

Wish me luck!

Scott in Penfield NY

good luck, and as always, pics.......

 

[80sDweeb]

I got the saw, for the asking price of $60, which included about a gallon of bar oil, but it isn't all good news. The compression isn't very good, so when I get a chance I'll have to dig in and figure out why. If I'm lucky the cylinder will be usable. If I'm very lucky it will just need a ring, or has a stuck ring I can free up. The seller didn't seem to think it was a problem, but he wouldn't budge on the price, and the rest of the saw is in such good shape that I welcome it as a project. It is quite dirty, but not from use, just from sitting in a garage, with a film of grime covering it. Should clean up well enough.

The seller had to sell because a work-related brain injury makes him unable to operate dangerous equipment due to slowed reflexes. Makes me less inclined to complain about the soreness I feel in my shoulders when I'm starting and using a saw (which I believe is caused by the beginnings of arthritis, like my father has.)

Now my first technical question. I expect I'll want to replace my impulse line, as I've seen that mentioned here a few places. Is the impulse line a special piece, or can I just find a rubber hose to replace it? I looked at a picture from a parts seller online, and it didn't look like anything special, just a rubber hose.

Thanks (I think) for getting me into these saws! My wife shakes her head at me getting another one, but I think saws are the smallest thing I can acquire that I can enjoy fixing. I tried cameras, and after I "fix" them they still don't work (which is no fun.) She's against my former "cars, trucks, and motorcycles" (aka junk) collecting, which quickly becomes unmanageable, so the ease of keeping (under 10 for now) a few saws is a great benefit. We'll see how long I stay under 10! This saw is number 6, and I've been promised and await number 7, ha!

Scott in Penfield NY

 

[Acornhill]

Can you scan that?

Yes mark i can scan it for you.

 

[Acornhill]

Here is a quick pic

Sent from my LG-D800 using Tapatalk

 

[redunshee]

I got the saw, for the asking price of $60, which included about a gallon of bar oil, but it isn't all good news. The compression isn't very good, so when I get a chance I'll have to dig in and figure out why. If I'm lucky the cylinder will be usable. If I'm very lucky it will just need a ring, or has a stuck ring I can free up. The seller didn't seem to think it was a problem, but he wouldn't budge on the price, and the rest of the saw is in such good shape that I welcome it as a project. It is quite dirty, but not from use, just from sitting in a garage, with a film of grime covering it. Should clean up well enough.

The seller had to sell because a work-related brain injury makes him unable to operate dangerous equipment due to slowed reflexes. Makes me less inclined to complain about the soreness I feel in my shoulders when I'm starting and using a saw (which I believe is caused by the beginnings of arthritis, like my father has.)

Now my first technical question. I expect I'll want to replace my impulse line, as I've seen that mentioned here a few places. Is the impulse line a special piece, or can I just find a rubber hose to replace it? I looked at a picture from a parts seller online, and it didn't look like anything special, just a rubber hose.

Thanks (I think) for getting me into these saws! My wife shakes her head at me getting another one, but I think saws are the smallest thing I can acquire that I can enjoy fixing. I tried cameras, and after I "fix" them they still don't work (which is no fun.) She's against my former "cars, trucks, and motorcycles" (aka junk) collecting, which quickly becomes unmanageable, so the ease of keeping (under 10 for now) a few saws is a great benefit. We'll see how long I stay under 10! This saw is number 6, and I've been promised and await number 7, ha!

Scott in Penfield NY

Don't use Tyson as an impulse line. I use black Echo fuel line which has worked well.

 

[Acornhill]

One more

Sent from my LG-D800 using Tapatalk

 

[Acornhill]

One more

Sent from my LG-D800 using Tapatalk

 

[R DeLawter]

redunshee said:

"Don't use Tygon as an impulse line. I use black Echo fuel line which has worked well."

I was wondering why? Is it too flexible?

 

[rms61moparman]

redunshee said:

"Don't use Tygon as an impulse line. I use black Echo fuel line which has worked well."

I was wondering why? Is it too flexible?

Yes, especially when it gets warm.


Mike

 

[barneyrb]

I got the saw, for the asking price of $60, which included about a gallon of bar oil, but it isn't all good news. The compression isn't very good, so when I get a chance I'll have to dig in and figure out why. If I'm lucky the cylinder will be usable. If I'm very lucky it will just need a ring, or has a stuck ring I can free up. The seller didn't seem to think it was a problem, but he wouldn't budge on the price, and the rest of the saw is in such good shape that I welcome it as a project. It is quite dirty, but not from use, just from sitting in a garage, with a film of grime covering it. Should clean up well enough.

The seller had to sell because a work-related brain injury makes him unable to operate dangerous equipment due to slowed reflexes. Makes me less inclined to complain about the soreness I feel in my shoulders when I'm starting and using a saw (which I believe is caused by the beginnings of arthritis, like my father has.)

Now my first technical question. I expect I'll want to replace my impulse line, as I've seen that mentioned here a few places. Is the impulse line a special piece, or can I just find a rubber hose to replace it? I looked at a picture from a parts seller online, and it didn't look like anything special, just a rubber hose.

Thanks (I think) for getting me into these saws! My wife shakes her head at me getting another one, but I think saws are the smallest thing I can acquire that I can enjoy fixing. I tried cameras, and after I "fix" them they still don't work (which is no fun.) She's against my former "cars, trucks, and motorcycles" (aka junk) collecting, which quickly becomes unmanageable, so the ease of keeping (under 10 for now) a few saws is a great benefit. We'll see how long I stay under 10! This saw is number 6, and I've been promised and await number 7, ha!

Scott in Penfield NY

If you don't want to fool with it and would like your money back just shoot me a message......

 

[Guido Salvage]

redunshee said:

"Don't use Tygon as an impulse line. I use black Echo fuel line which has worked well."

I was wondering why? Is it too flexible?

Yes, especially when it gets warm.


Mike

Somewhat like pushing a lawnmower with a rope...

 

[Modifiedmark]

Here is a quick pic

Sent from my LG-D800 using Tapatalk

Please do! I would like the whole IPL for that as I have never found that one for the Micro CVA. I have the saw though!

 

[Modifiedmark]

If you don't want to fool with it and would like your money back just shoot me a message......

Hey Randy!!

Doubt if he bites.

 

[fossil]

Please do! I would like the whole IPL for that as I have never found that one for the Micro CVA. I have the saw though!

Is this the one you are looking for?

 

[Modifiedmark]

Is this the one you are looking for?

Thanks Tim, but Micro XXV CVA Not S25CVA.