Nik's Poulan Thread

[s sidewall]

Yep, two of them but both show cracks in them, not as bad as yours. Might want to find a real good welder.

Steve

 

[Webevan]

Your idle screw needs adjusted counter clockwise until chain stops moving at idle. Check out page 13 of link for adjustment: http://www.klippo.com/ddoc/pouo/pouo2009_euen/pouo2009_euen__545123540.pdf

Thank you!!

 

[RedneckChainsawRepair]

2 good welders for mag clutch covers. Roger @3000 FPS and Shaun scarr

 

[green lust]

I’ve found a saw I need in Indianapolis In . The guy is not interested in shipping it to me . Is anyone on here near there that could help me make this work ?

 

[s sidewall]

Sounds like you got cad

Steve

 

[95custmz]

I’ve found a saw I need in Indianapolis In . The guy is not interested in shipping it to me . Is anyone on here near there that could help me make this work ?

I’m in Plainfield, IN. Basically, the West side of Indy. How can I help you out?


Sent from my iPhone using Tapatalk

 

[EngineNoO9]

Coming in here to find out what people have done to replace the oil pump diaphragm on a poulan 3700. Mine appears to be working fine but I'm stripping the saw down to re-ring it, new seals, and clean the cylinder. Figure I may as well ensure the oiler is good. I've seen that the part is no longer available. Where can I source one or make something work? Or just clean up what I have well and go from there?

 

[green lust]

I’ve found a saw I need in Indianapolis In . The guy is not interested in shipping it to me . Is anyone on here near there that could help me make this work ?

Sounds like you got cad

Steve

I think this is the last one that I need . Maybe, for a while .

 

[s sidewall]

I've said that before and ate my words.

Steve

 

[Todd Loosli]

Coming in here to find out what people have done to replace the oil pump diaphragm on a poulan 3700. Mine appears to be working fine but I'm stripping the saw down to re-ring it, new seals, and clean the cylinder. Figure I may as well ensure the oiler is good. I've seen that the part is no longer available. Where can I source one or make something work? Or just clean up what I have well and go from there?

PM sent

 

[95custmz]

I think this is the last one that I need . Maybe, for a while .

Is there a particular saw on Craigslist that your looking at?


Sent from my iPhone using Tapatalk

 

[95custmz]

Never mind. Just got your PM.


Sent from my iPhone using Tapatalk

 

[s sidewall]

Well is it green, and don't say it's a 8500.

Steve

 

[green lust]

Well is it green, and don't say it's a 8500.

Steve

It’s red on the outside but green on the inside .

 

[s sidewall]

Forestery Poulan

Steve

 

[green lust]

Forestery Poulan

Steve

Craftsman 5.2

 

[Todd Loosli]

I don't think I believe it, guess a picture or 3 would help me understand what a craftsman 5.2 looks like and a little story about the find

 

[RedneckChainsawRepair]

I don't think I believe it, guess a picture or 3 would help me understand what a craftsman 5.2 looks like and a little story about the find

Aaron has some red versions posted here and my website. 5200 sold by craftsman.

 

[green lust]

I don't think I believe it, guess a picture or 3 would help me understand what a craftsman 5.2 looks like and a little story about the find

Aaron has some red versions posted here and my website. 5200 sold by craftsman.

View attachment 740397

This is the pic from the add . The seller was not willing to ship the saw . A fellow AS member from Indianapolis is supposed to look at for me today . I don’t know him and he don’t know me but he offered to help me make this possible. I hope it works out
Gary

 

[Acornhill]

Sent from my iPhone using Tapatalk