Nik's Poulan Thread

[Todd Loosli]

Only way to know how to go forward is get the bore measured. Then you can make a decision on it's future. 4000=1.937 thin ring
3700=1.875 thin ring
3400=1.812 thick ring.

 

[Cookie]

Here’s the 505 blown apart waiting for good cases from Kevin. They’ll get split for bearings and seals before it goes together.

 

[RedneckChainsawRepair]

Somewhere between us now. @Cookie

96 so year newer on this one.

Not near as fubbared as that one. Watch using those non oem fasteners I am seeing on that one. Make sure right threads. These all looked fine from quick look over.

 

[bob kern]

So I'm guessing after looking at a wild thing someone just gave me that there is both pre and post strato wild things????????
This one looks identical to the 2050 and craftsman saws I've been tinkering with. Just has 2 purple covers.
A different one sitting on my shelf is strato.

 

[RedneckChainsawRepair]

So I'm guessing after looking at a wild thing someone just gave me that there is both pre and post strato wild things????????
This one looks identical to the 2050 and craftsman saws I've been tinkering with. Just has 2 purple covers.
A different one sitting on my shelf is strato.

Yes better non strato IMO and then strato. Like all those pics I posted earlier in thread comparing both cylinders.

2375 was one of the non strato and the 4018 was one of the later strato. I despise the strato ones myself.

Both make your hands numb after while. Wish they would have done the WT AV in US like they did the PP260. Only seen one WT AV to date.

 

[bob kern]

Yes better non strato IMO and then strato. Like all those pics I posted earlier in thread comparing both cylinders.

2375 was one of the non strato and the 4018 was one of the later strato. I despise the strato ones myself.

Both make your hands numb after while. Wish they would have done the WT AV in US like they did the PP260. Only seen one WT AV to date.




View attachment 1113614

Totally agree on the strato. Not had one that ran well consistently yet.

 

[bob kern]

In my continuing purge of the non running poulan shelf, I went through a 2550 tonight. It fired right up so that's a good sign at least. Will do more of a test drive at lunch tomorrow. Slightly different from the 2150 I see. Maybe a little bit of an upgrade. Still non strato.
I think I have another one in a tub. Will do it next if I get a chance. There is a blue letter " sears best" craftsman in there as well but unfortunately not the one with the metal toggle switch.

 

[bob kern]

Well I snuck out at 9:00 break for a quick cut out of curiosity. Starts well and idles great. Still fat on the high side but I plan to open the muffler up a tad so I won't mess with the high til that is done. It might wind up being about right after a little mod.
View attachment VID_20230920_085552008.mp4

 

[heimannm]

From the overall design and features I am guessing this is a Poulan, but can anyone tell me the model? I don't think I will try to make it a runner, but I would like to have a little more information on the model and hopefully and IPL.













Thanks,

Mark

 

[heimannm]

It has a few issues internally...

 

[scottr]

The Poulan model # is 20 .

 

[bob kern]

A few????lol

 

[No face 243]

I have a poulan pro pp3516avx, and a piulan pro pp4620avx, are those worth getting running both need new top ends

 

[RedneckChainsawRepair]

Yep the XX or 20.

They made the 76 bicentennial from them. Local has 2 NOS in red boxes he picked up for collecting. Back to back serial numbers.

Owned a couple and sent those down the road. First one in pic I used for a bit. But liked the 2000 better.

 

[heimannm]

Does anyone have a decent electronic IPL for the XX?

Thanks,

Mark

 

[RedneckChainsawRepair]

Does anyone have a decent electronic IPL for the XX?

Thanks,

Mark

Under IPL at bottom https://www.acresinternet.com/cscc....ae246e47416ddc0588256bfc000d0cc0?OpenDocument

 

[RedneckChainsawRepair]

Some more for xx Mark. Might be easier for ya then above.

 

[RedneckChainsawRepair]

Guys asking for parts so time to organize this nos and used stuff. Lot of hard to find stuff.
Poulan 505 445 425 475 425 Jonsered 2083 2077.

Mainly some smalls pulled today to get figured what was left.

If need something let me know. I've been selling off for years now. No longer buying and stocking stuff back. When I am out I am out.

NOS intake boot, NOS upper right spring av, 2 lower rubber av, used boot, spoke for.

Not all pics posted.

 

[Maintenance supervisor]

Guys asking for parts so time to organize this nos and used stuff. Lot of hard to find stuff.
Poulan 505 445 425 475 425 Jonsered 2083 2077.

Mainly some smalls pulled today to get figured what was left.

If need something let me know. I've been selling off for years now. No longer buying and stocking stuff back. When I am out I am out.

NOS intake boot, NOS upper right spring av, 2 lower rubber av, used boot, spoke for.

Not all pics posted.

View attachment 1114305View attachment 1114306View attachment 1114307View attachment 1114308View attachment 1114309View attachment 1114310View attachment 1114311View attachment 1114312View attachment 1114313View attachment 1114314

I need an oil pump drive for my 475pp.
It's the brass one.

 

[RedneckChainsawRepair]

I need an oil pump drive for my 475pp.
It's the brass one.

Returned PM to make sure your running the metal gear still in the 475. Pics sent of 3 different styles.