Want to Sell NOS Homelite Crank Seals # 71597 Fits Original EZ and others

[buzz sawyer]

I have 20 of these seals, all NOS, soft and pliable with no rust. Two are required on each side of the crank - one lip facing inward and one facing outward. The seal is also used in the starter but is not critical imo. Asking $5.50 each or $80 for all shipped to lower US 48 states only - shipping included. Pay with paypal only. The penny is for comparison but I will include it if you like.

 

[sawdust21]

Do you still have any of these seals?

 

[buzz sawyer]

Yes I do. I'll have to get them from storage and get a count. How many are you looking for?
I'm not sure if they're used in the starter - that mat be a smaller seal. I took that line out of my orig. post.

 

[sawdust21]

Yes I do. I'll have to get them from storage and get a count. How many are you looking for?
I'm not sure if they're used in the starter - that mat be a smaller seal. I took that line out of my orig. post.

I'll need to dig into my Buz to make sure, but likely 2.

 

[canadian175]

Will they fit a zip?

 

[buzz sawyer]

I'll need to dig into my Buz to make sure, but likely 2.

The old EZ takes two on each side, installed back-to-back so they seal against vac and pressure.
see # 13. two on both sides of the crank. Homelite # 71597

 

[buzz sawyer]

Will they fit a zip?

I don't have an IPL for the Zip. Homelite part # is 71597.

 

[canadian175]

So you no idea ?someone should know.hay guy can you help?

 

[buzz sawyer]

So you no idea ?someone should know.hay guy can you help?

According to this the ZIp uses a different part #.

https://www.leonschainsawpartsandre...te_zip_chainsaw_ipl__august_1962__23311-b.pdf

 

[buzz sawyer]

I seem to have misplaced these seals. Still looking for them.

 

[770G]

I'd be interested in two of the 71597 seals if they are still available.

 

[dfkustom]

I have 17 of those seals of someone need
71597