OK.........Andy...........Question On The 441 Oiler???

[rahtreelimbs]

I am getting about 1/2 tank of bar oil per tank of fuel..............does stihl have a high output oiler for this saw???

 

[BostonBull]

I could be wrong but I believe the high output oiler is standard on the full wrap handle version.

 

[rahtreelimbs]

I could be wrong but I believe the high output oiler is standard on the full wrap handle version.

That is just what I am looking for............have a part # and the cost???

 

[Dadatwins]

Mine is stock with a 1/2 wrap handle, oiler turned all the way up and it only leaves about 1/3 tank of oil per full fuel tank. If yours is only leaving 1/2 tank might be clogged?

 

[rahtreelimbs]

Mine is stock with a 1/2 wrap handle, oiler turned all the way up and it only leaves about 1/3 tank of oil per full fuel tank. If yours is only leaving 1/2 tank might be clogged?

When I looked in the oil tank my shop wasn't well lit. The 1/2 tank was a guesstimate.


I don't think it is clogged.............the saw only has 5-10 tanks thru it!!!

 

[Dadatwins]

Mine has a few more tanks through it, running original stihl bar and the second 20" chain on it. I have not had any lack of oil issue on mine.

 

[rahtreelimbs]

Just re-checked my 441. I use about 2/3 oil a tank of oil to 1 tank of fuel.

Don't get me wrong it will sling oil.............I would just like more!!!

 

[SawTroll]

Just re-checked my 441. I use about 2/3 oil a tank of oil to 1 tank of fuel.

Don't get me wrong it will sling oil.............I would just like more!!!

If you use Stihl B&C, with the Oiliomatic system, that sounds like more than enough........

 

[2000ssm6]

opcorn: opcorn: opcorn:

 

[rahtreelimbs]

If you use Stihl B&C, with the Oiliomatic system, that sounds like more than enough........

Did I ask you................NO!!!

 

[PA Plumber]

You obviously aren't "blipping" the throttle enough!!:greenchainsaw: :hmm3grin2orange:

BTW...


I guess you didn't aske me either!!!!!!!!!!!!!!!!!!!!!!!!!!!!:biggrinbounce2:

 

[chowdozer]

Hahaha! Yeah rahtree, blip the throttle more!
I use a little more oil than you with the HO oiler but never run out.

 

[Reddog]

When I bought mine we checked the numbers ,and I think it has the same oilers as the MS460.
I will let Lake answer, he is always right.

 

[tawilson]

He already did a thread on this and it is the same oiler and he did another thread on how to replace it. I'll see can I go find. I never measured it, but I dont' think my 441 puts out enough oil, so I might do the swap someday.

 

[Lakeside53]

The wrap has the HO oiler. You can upgrade the non-wrap for less than $30 by changing the piston to 1128 647 0602 and the control bolt to 1128 647 4802

 

[rahtreelimbs]

The wrap has the HO oiler. You can upgrade the non-wrap for less than $30 by changing the piston to 1128 647 0602 and the control bolt to 1128 647 4802

Thanx Andy!!!

 

[PA Plumber]

I haven't checked the 441 oil usage a while.

Ran out of fuel today. Oil reservoir had about an 1/8" left.

Would the 98 degree F weather cause it to go through oil faster? I use Stihl B & C in the orange container.

I may actually have to turn the oiler back just a tad.:jawdrop:

 

[Tzed250]

Could be the dreaded suckback...

 

[Lakeside53]

I haven't checked the 441 oil usage a while.

Ran out of fuel today. Oil reservoir had about an 1/8" left.

Would the 98 degree F weather cause it to go through oil faster? I use Stihl B & C in the orange container.

I may actually have to turn the oiler back just a tad.:jawdrop:

Yes....