Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[WKEND LUMBERJAK]

This has been an issue for weeks before the 'crash'. I have never been to Bangladesh. However I may know a bangladeshihacker. (his picture looks familiar anyhow.)

I sure like the felling dogs on a 757 over a 372.

I need some west coast dogs on the 372. No more of the east coast puppies.

Do they make a Mid West set of felling dogs?:msp_ohmy::msp_ohmy:

 

[RVALUE]

Do they make a Mid West set of felling dogs?:msp_ohmy::msp_ohmy:

 

[Showme]

Has anyone started a roster of attendee's at the upcoming GTG? The weather turning off nice is making me ready to go!

 

[WKEND LUMBERJAK]

Dead serious.

I would think if you where not in compliance you would have been notified and or your ad would not be up as your signature.

 

[RVALUE]

Took 2 trees from above / off my own house yesterday. Then one elm (20 inch) out of the yard. Got my son's 240 running, first thing my wife did was plunge it into the dirt and find a rock. (rocks are rare here at my house, I hauled them in).

The 346 just sat on the deck unscathed.

 

[RVALUE]

That 346 that the person formerly known as supercabs that no longer comes around, tuned my second 346 and it barely ran initially. Now since my other one is down waiting for a trigger, ??????, it works pretty well. Must have just had bad fuel in it.


They are a nice saw..... glad they discontinued them.......

 

[Mo. Jim]

You fellas have slowed down!!
The neighbor that brought me that basket case Stihl 460 came and picked up his saw last night...
While I had it apart, I ground a set of timing #'s that Wiggs gave me into the jug...
After he made a test cut with it, I don't think I could have slapped the smile off his face, had I tried... Hope it don't blow up...:msp_wink:

Speaking of 460's, did you get the coil I sent you and did it work? I just grabbed one out of my stash and didn't take the time to check it.

 

[Hedgerow]

Speaking of 460's, did you get the coil I sent you and did it work? I just grabbed one out of my stash and didn't take the time to check it.

You bet Jim... Slapped it in as soon as it got here, and it was off to the races...
The way that 460 ran, it almost made me want one, but I came to my senses...
Thank goodness...
:msp_wink:

 

[sunfish]

That 346 that the person formerly known as supercabs that no longer comes around, tuned my second 346 and it barely ran initially. Now since my other one is down waiting for a trigger, ??????, it works pretty well. Must have just had bad fuel in it.


They are a nice saw..... glad they discontinued them.......

I did a bunch of cuttin yesterday with my old 346.

They are a very good saw! Especially when ported!

 

[workshop]

Hey Everybody, Another update for the charity cut. Still Sept 21st, still same place. BUT, we will be providing lunch. Hope everyone likes Chili.

Updated list:
Hinerman
Diggersdad
Moody
Cobey
Hedgerow
Levi
Worksawcollector
Oliver1655
Lurch2

A couple had to drop out. Things happen at last minute. That's ok, I'll try to organize another cut in 2 or 3 months. I hope everyone likes this one and would be willing to come again. A big thank you in advance for all the help. It's very much appreciated.
Steve

 

[Mo. Jim]

Got a little rain shower here this morning,just enough to make it gummy on top. Supposed to be more on the way,but I'll belive that when I see it. The one inch+ rains just seem to split and go around us.:msp_sad:Oh well enough whining,it's still a great day to be alive. Have a great day and keep the shiney side up.

 

[workshop]

For some reason I can't get pics to upload. I finished the 2 Husky riders for the gentleman and brought the Echo CS670 home. It will make a nice addition to the firewood workers.

 

[teacherman]

John, got any midol? Just wondering if you remembered and stuff.:msp_rolleyes:

HAHAHAHA

Been a long time.

 

[teacherman]

Best Use for a Saw

Best thing I ever did with a saw. The original Hotsaw from the first Jasper (actually Nail) GTG.

I have been trying to load some pictures, but have been unsuccessful five times. jpeg is supposedly permitted, and I got them each below 2mB.

Musta been the hackers.

 

[WKEND LUMBERJAK]

Hay John.. it's been a day or two.

 

[workshop]

Best thing I ever did with a saw. The original Hotsaw from the first Jasper (actually Nail) GTG.

I have been trying to load some pictures, but have been unsuccessful five times. jpeg is supposedly permitted, and I got them each below 2mB.

Musta been the hackers.

I've been having problems too. I'd sure like to get my hands on these hackers!

 

[diggers_dad]

Hey Everybody, Another update for the charity cut. Still Sept 21st, still same place. BUT, we will be providing lunch. Hope everyone likes Chili.

Updated list:
Hinerman
Diggersdad
Moody
Cobey
Hedgerow
Levi
Worksawcollector
Oliver1655
Lurch2

A couple had to drop out. Things happen at last minute. That's ok, I'll try to organize another cut in 2 or 3 months. I hope everyone likes this one and would be willing to come again. A big thank you in advance for all the help. It's very much appreciated.
Steve

I'm still in and planning on taking Friday off just to get loaded and ready for the trip up there. I don't know if I'll have my two boys or not, the wife is thinking about a trip to Silver Dollar City that day. I had hoped for a cortisone shot for my shoulder before the cut but the doctor says he wants to see an MRI before deciding if he'll give me another shot or do surgery. I may be just a bit on the slow side if it acts up.

Now, about that 031 "parts saw" in your signature... How about you bring that along and let's see if we can do some trading?

I am still planning on bringing an almost new, still in the box, with papers Earthquake 38cc saw for a door prize, as well as a couple of goodies like a scrench and bar nut combo pack, a new chain or two and whatever else I can dig up before the weekend gets here. Looking forward to seeing everyone there.

Hope you're planning on making it to the GTG down this way next month. My visit last year was cut short with a sick boy, but I'm hoping to make up for it this year.

dd

 

[cobey]

I've been having problems too. I'd sure like to get my hands on these hackers!

sorry I didnt get your text last night Steve! I was making noise earlyer and didnt hear the phone, then fell asleep on the puter.

 

[sawnami]

Do they make a Mid West set of felling dogs?:msp_ohmy::msp_ohmy:

The Ozarks set has one tooth.:msp_rolleyes:

 

[RVALUE]

The Ozarks set has one tooth.:msp_rolleyes:

Houndstooth?