Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[WKEND LUMBERJAK]

i've seen this post on other threads on AS too. if he is, in fact, an administrator then he should be watching; why advertise it unless he's trying the big brother routine. if that's the case - screw you for your heavy-handedness.
if he's not an admin then he's just gotta be out chain yanking OR he can't figure any other way to subscribe to the thread - he joined in september 2013 and has a limited number of posts.
go figure.
either way - meh!!!
course this could be my last post on AS too. lol
yall have a good day

Like Jerry I wondered who he was never seen him before. There is always the other place.

 

[WKEND LUMBERJAK]

Morning fellas

morning Mike

 

[sunfish]

He's watching, be careful guys!

 

[WKEND LUMBERJAK]

All because of you Don you trouble maker.

 

[workshop]

Morning everybody.

 

[Oliver1655]

Morning Steve, any idea how many we might have showing up for Charity Cut 5?

 

[Steve NW WI]

I wouldn't worry about Todo - he's most likely trying to fix bugs in the system, and posting to see if he can recreate the problem.

Worry MUCH more about that Stihl Sawing guy, not because he's a mod, but because he's gonna try riding without training wheels this year

 

[Hedgerow]

Morning fellas

Mornin' Mike..

 

[Hedgerow]

Morning Steve, any idea how many we might have showing up for Charity Cut 5?

I think I may have at least 2 boys with me and maybe Cobey. I can't remember if he was clear for this one or not..

 

[Hedgerow]

i've seen this post on other threads on AS too. if he is, in fact, an administrator then he should be watching; why advertise it unless he's trying the big brother routine. if that's the case - screw you for your heavy-handedness.
if he's not an admin then he's just gotta be out chain yanking OR he can't figure any other way to subscribe to the thread - he joined in september 2013 and has a limited number of posts.
go figure.
either way - meh!!!
course this could be my last post on AS too. lol
yall have a good day

You're a rebel at heart Jerry...

 

[67L36Driver]

Goting to be nice day today.

Darn J-Red don't want to pull fuel. Normally I'd just wet the pump side diaphram with mix but the silly 90 deg. air filter adaptor covers one of the cover screws.

So much for 'Zow-Wee' modifications.............................................................................Time for my mid-morning nap..............................

 

[Hinerman]

Great!!!
Why???

Cause we be da beeeeeest....

 

[Hinerman]

i've seen this post on other threads on AS too. if he is, in fact, an administrator then he should be watching; why advertise it unless he's trying the big brother routine. if that's the case - screw you for your heavy-handedness. if he's not an admin then he's just gotta be out chain yanking OR he can't figure any other way to subscribe to the thread - he joined in september 2013 and has a limited number of posts. go figure. either way - meh!!! course this could be my last post on AS too. lol yall have a good day

This made me laugh. Semper Fi JC

 

[moody]

If anyone is interested in picking up a ported 50cc saw I've got a couple that need a new home. Husqvarna 550xp and a Stihl 261. Hedgerow ran a 261 I did so he could give some insight into how it ran. Hopefully I can get videos up by the weekend

Sent from my SM-N900V using Tapatalk

 

[sunfish]

If anyone is interested in picking up a ported 50cc saw I've got a couple that need a new home. Husqvarna 550xp and a Stihl 261. Hedgerow ran a 261 I did so he could give some insight into how it ran. Hopefully I can get videos up by the weekend

Sent from my SM-N900V using Tapatalk

I'd like to run the 550. No interest in the other... You will be in Mansfield?

 

[moody]

I'd like to run the 550. No interest in the other... You will be in Mansfield?

When is it? I've been busy the past two weeks getting saws done for a local logging company. I kinda catch the thread as I can

Sent from my SM-N900V using Tapatalk

 

[Oliver1655]

April 4th some of us will be prepping & Saturday the 5th will be the big cut.

 

[moody]

I can't make any promises on the 5th. I'd like to go the last charity cut I said I'd be at ice kept me at home. I don't forsee that being an issue this time. But that's the weekend of my dad's birthday so it will be dependent on what he's doing.

Sent from my SM-N900V using Tapatalk

 

[Oliver1655]

While overall I like my splitter, there are a few minor changes I would like to make so I plan to build another splitter. The big holdup is a cylinder. Sounds simple enough, there are lots of cylinders available but I'm going to be picky this time. I want to increase tonnage while not increasing cycle time. My current splitter has a cycle time of 8.8 sec & 15.7 tons of pressure.

Goal:
Tonnage:
At 2,500 psi = 24.9 ton
At 3,000 psi = 29.5 ton

Cycle time of 7 sec using a 28 gpm pump (This is my plan)
Cycle time of 9 sec using a 22 gpm pump (which is the cycle time my current splitter has)
Cycle time of 13 sec using a 16 gpm pump

Specifications for cylinder:
- 5" bore
- 24" stroke
- 3" ram
- 1-1.2" hole for pins in cross tube mounting points.
- 3/4" JIC ports (Flared to make better joints = less leak potential.)

I have asked a company who builds cylinders to give me a quote for cylinders to match these specifications to potentially create a supplier. I have used quantities of 10 & 20 for pricing.

Is there anyone who would be interested (not asking for a commitment), in a cylinder designed for splitters.

If anyone has a source for cylinder Which match the above specifications I would love to hear it.

 

[Hedgerow]

While overall I like my splitter, there are a few minor changes I would like to make so I plan to build another splitter. The big holdup is a cylinder. Sounds simple enough, there are lots of cylinders available but I'm going to be picky this time. I want to increase tonnage while not increasing cycle time. My current splitter has a cycle time of 8.8 sec & 15.7 tons of pressure.

Goal:
Tonnage:
At 2,500 psi = 24.9 ton
At 3,000 psi = 29.5 ton

Cycle time of 7 sec using a 28 gpm pump (This is my plan)
Cycle time of 9 sec using a 22 gpm pump (which is the cycle time my current splitter has)
Cycle time of 13 sec using a 16 gpm pump

Specifications for cylinder:
- 5" bore
- 24" stroke
- 3" ram
- 1" hole for pins in cross tube mounting points.
- 3/4" JIC ports (Flared to make better joints = less leak potential.)

I have asked a company who builds cylinders to give me a quote for cylinders to match these specifications to potentially create a supplier. I have used quantities of 10 & 20 for pricing.

Is there anyone who would be interested (not asking for a commitment), in a cylinder designed for splitters.

If anyone has a source for cylinder Which match the above specifications I would love to hear it.

Possibly, yes..