Hedgerow
HACK
It's sitting in the shop!!!You are bringing that to my house right.
Come and get er'!!!!
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
Come and get er'!!!!
cobey
Addicted to ArboristSite
ill check but the two I got have no coil wires... but ill check
WKEND LUMBERJAK
Addicted to ArboristSite
WKEND LUMBERJAK
Addicted to ArboristSite
Good morning .
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Good morning Kenneth and everyone!
Oliver1655
Addicted to ArboristSite
That it is! Was a bit foggy but it should be really nice when I get off work.
Drinking coffee and waiting for 8:00 a.m. so I can test cut with a Craftsman/Poulan 2400. (Nieghborhood noise curfew imposed by Blondie.)
Hope B.I.L. calls to go fishing..............................................
Hope B.I.L. calls to go fishing..............................................
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Pull the rope at 7:59!
diggers_dad
Sawchologist
That's why we load it with the skid steer and dump it when we get to the destination...
Dang! I don't even have a decent lawn tractor. I still mow my yard with a 1983? John Deere 38" cut 11.5 hp rider. The thing won't die!
Some day I'll have some money for toys. Until then I'll just keep looking at all the good ideas you guys have and planning...
DD
diggers_dad
Sawchologist
I'm working on making a Wild Thingy coil work on a Pioneer Farmsaw. I've almost got the kinks worked out with some minor hillbilly machine work. If I ever get it going I'll do a thread on it.
Hedgerow
HACK
Hey mark, looks like Levi's little shindiawa has a coil issue...
It'll run like a top till it gets some time on it, then it'll just cut out and it's done..
WHOP!!!
Let sit for a whole and come back, and she'll start again... Spark is weak when it's there even..
It'll run like a top till it gets some time on it, then it'll just cut out and it's done..
WHOP!!!
Let sit for a whole and come back, and she'll start again... Spark is weak when it's there even..
Oliver1655
Addicted to ArboristSite
And did I read it is a 2 part coil?
Hedgerow
HACK
It is..
Despite sharpening and taking down the rakers freakin' safety chain still won't cut worth doo-doo. Don't know why I bother with the crap. Stop at Halls on the way to Horton, Ks.. is in order.
Oliver1655
Addicted to ArboristSite
That would make it more of a challenge. Do you change out both parts or one part at a time?
diggers_dad
Sawchologist
Once mine got warm it would backfire and quit. Spark was decent until the saw was about 10 or 15 minutes in to a good run. Let it cool down and it would run like a top again. This was my solution:
http://www.ebay.com/itm/IGNITION-CO...458?pt=LH_DefaultDomain_0&hash=item5afef9f41a
You can buy it now for more money; I was in no rush so I just put in the minimum bid and got a couple other things when I won the action. I know it's Chinese, but the OEM's are pricey. I have about 3 tanks on the new coil and it's done fine so far. The only part I replaced was the part next to the carburetor.
DD
diggers_dad
Sawchologist
I only replaced the part of the unit near the carburetor. They call the part next to the flywheel the "ignition exciter" and the part I replaced was called the "ignition coil". Go figure?
Hedgerow
HACK
WKEND LUMBERJAK
Addicted to ArboristSite
Man it is nice out I wish I was a old geezer going fishing.
