Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[WKEND LUMBERJAK]

Mike is that a 2188 in your I luve you pic.opcorn:opcorn:

 

[67L36Driver]

Oliver1655: I have a gearbox from Mo. Jim in addition to the Sturnk for the trip to the charity cut. Save a touch more room in the transport.

Observation: You won't find this kind of co-operation and generosity over on the corvette forum. (Too many arragont executive types wringing their hands over their 'investment'.)

 

[diggers_dad]

Morning all. Time for cup #4. I'm almost conversational at this point.

 

[Homelite410]

Mike is that a 2188 in your I luve you pic.opcorn:opcorn:

That's my ported 2186 former landing saw that will make a 660 blush...... its old fashioned ported no machine work but it sure runs good! Real good power band hella stout for torque! It has more in it but I likes it the way it is!!

 

[Homelite410]

Observation: You won't find this kind of co-operation and generosity over on the corvette forum. (Too many arragont executive types wringing their hands over their 'investment'.)

Nor the arrogant John Deere guys either.

 

[Hinerman]

Good morning to all you "lovers of the saw". I see one even loves it's owner back. I need a favor of all (or one) of you Iowa Charity Cutters this weekend. Mx_racer is bringing his custom made splitter to the Iowa Charity cut. He is wanting to sell it. I have no doubt it is nice. If you have time, will you give it a spin, check it out, and report back to me with your thoughts? Thanks in advance.

Who is going? Homelite, Workshop

 

[Mo. Jim]

Morning Gents, only on my second cup of coffee this morning, late start. Sitting here with the front door open to cool the house down. I think I should have used a little less hedge when I stoked the stove about midnight. Sunshine and 57 today, need at least two more cups before I think about going to work. Later Jim

 

[Homelite410]

I will tell you that splitter is bad a$$ as jim would say "that's good property" it winters at my house and he let's me use it as much as I want! Very good design, heavy (travels well on 15" tires and torsion suspension axle) plenty of power (14 HP Kohler)!!

What els would you like to know?

 

[Oliver1655]

Thomas, I used it at the GTG. I would not have any reservations about it's quality & build.

 

[Hedgerow]

Good morning to all you "lovers of the saw". I see one even loves it's owner back. I need a favor of all (or one) of you Iowa Charity Cutters this weekend. Mx_racer is bringing his custom made splitter to the Iowa Charity cut. He is wanting to sell it. I have no doubt it is nice. If you have time, will you give it a spin, check it out, and report back to me with your thoughts? Thanks in advance.

Who is going? Homelite, Workshop

Ran it...
Awesome machine...

 

[thinkrtinker]

Didn't run it
But boy does it look good!!
My splitter dreams of waking up and looking like that

 

[Hinerman]

it winters at my house and he let's me use it as much as I want!.......What els would you like to know?

HA, that is what I call a friend. Since it is heavy, is it balanced well enough that it can be moved around by hand? Is the receiver on the motor end or log tray end?

 

[Homelite410]

HA, that is what I call a friend. Since it is heavy, is it balanced well enough that it can be moved around by hand? Is the receiver on the motor end or log tray end?

Its a heavy bitc* to move by hand table to rear log & lift on drivers side as towed.

 

[Oliver1655]

Compare moving it around to Hedge's or mine. If you had a hard surface, you could use a trailer dolly & with a little grunt move it.


The hitch is on the opposite end as the wedge/out-feed table.

 

[sawnami]

Oliver1655: I have a gearbox from Mo. Jim in addition to the Sturnk for the trip to the charity cut. Save a touch more room in the transport.

Observation: You won't find this kind of co-operation and generosity over on the corvette forum. (Too many arragont executive types wringing their hands over their 'investment'.)

Or my BMW motorcycle forum. They over analyze EVERYTHING and get in over their heads frequently doing repairs and maintenance. I start a peeing match with a rider in Australia often. They get pretty stirred up when I call Tammi's and my bikes Bavarian Made Wrecks (BMW). What can I say, I call 'em as I see 'em. ;-)

 

[67L36Driver]

Or my BMW motorcycle forum. They over analyze EVERYTHING and get in over their heads frequently doing repairs and maintenance. I start a peeing match with a rider in Australia often. They get pretty stirred up when I call Tammi's and my bikes Bavarian Made Wrecks (BMW). What can I say, I call 'em as I see 'em. ;-)

Love it!


No time to get chains today but Blondie let me have the car long enuff to get the clutch cover for the J.D. 15. Sticker for the a.f. lid is due tomorrow. (running deer)

 

[teacherman]

Or my BMW motorcycle forum. They over analyze EVERYTHING and get in over their heads frequently doing repairs and maintenance. I start a peeing match with a rider in Australia often. They get pretty stirred up when I call Tammi's and my bikes Bavarian Made Wrecks (BMW). What can I say, I call 'em as I see 'em. ;-)

When people are that uptight, it's just entertainment getting them stirred up.

 

[67L36Driver]

I'm a Deere collector by default. They happen to be made by Remington.

Now if I find a Deere nut with deep pockets...................................................

 

[WKEND LUMBERJAK]

When people are that uptight, it's just entertainment getting them stirred up.

Good evening John and Carl

 

[Homelite410]

Evening Kenneth! Carl! John!