Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
It's pretty easy to get mail at a hotel. Have the sender ship to the hotel address c/o your name and room number. Then just let the front desk staff know that you are expecting a package. I've done this a few times and never had a problem.

Nice looking log piles. Is the stave wood you're cutting to be used for barrels?
Yes it's for barrels. Brings good money. That log pile is worth around $50k the way it sits.
 
It's pretty easy to get mail at a hotel. Have the sender ship to the hotel address c/o your name and room number. Then just let the front desk staff know that you are expecting a package. I've done this a few times and never had a problem.

Nice looking log piles. Is the stave wood you're cutting to be used for whiskey barrels?


It works real well I have done it a lot working out of town. You can also have the front desk call you when said package arrives if it is time sensitive.:clap::clap:
 
Yup.. 10 degree top plate and mill some boards..
I get 2-3 of these per tank.. The 9010 must not be as thirsty as those quad port rigs...

View attachment 422895
Might not be. Seems the more compression isn't what you want on a milling saw. A stock 395 cut just as much on a tank and a 088 cut more wood per gallon of mix.
 
The MS200T from the pile pumps 130(ish), pops on a prime. Heck, I had the poor old turd running. Good throttle response to boot.
The bad: it needs everything except the engine, ignition and carb.
View attachment 422825
View attachment 422826View attachment 422827
View attachment 422828

I figured it to leak like a seive at the crack but only a slow drip. Fuel line leaks much worse.
I put the 200T on KC Craigslist. I will ship to a regular Midlander.
Needs about 300-350 in parts by my estimate.
 
Back
Top