Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[jerrycmorrow]

What is the closest inch tap drill size for 5mm x 0.80mm?
The 'Easy Out' ain't working and the last thing I want is a broken off one in the hole.

you tried kroil and/or heat on it yet?

 

[67L36Driver]

2171 pops on a prime.
Out of mix, need spade terminal for kill switch, etc.. Geezer woman took off with the car.[emoji16]

 

[67L36Driver]

Chef: You run 1/4"?

I have two Stihl 3849 660 X020 packages of presets.

 

[67L36Driver]

Opened the Mall NOS grab bag I got off evilbay.
Bunch of 9/16" and 7/16" cutters, ect..

 

[sawnami]

you tried kroil and/or heat on it yet?

Go the health food store and get a bottle of wintergreen oil. Never seen anything better. Seen it used for removing frozen medium duty truck king pins and diesel injectors that have broken every puller known to mankind trying to get them out.

Sent from my SM-N910V

 

[WKEND LUMBERJAK]

Go the health food store and get a bottle of wintergreen oil. Never seen anything better. Seen it used for removing frozen medium duty truck king pins and diesel injectors that have broken every puller known to mankind trying to get them out.

Sent from my SM-N910V

Thats a new one for me.

 

[bigtuna]

Evening everone. Off work at 1:00 this aft. Went to fastnall bought intake and exhaust bolts, beats race bros. At $4.00 a pc. For the 61 conversion. Went to feed store bought feed.

 

[67L36Driver]

The 2171 runs but without a top cover and air filter, no load tests.
Coil puts out very weak spark at cranking speed.
Temporary splice in 5mm plug wire.

1/2 of a 16 ga butt splice with the cores lapped over each other. Later I will shorten the lead and cover with 1/4 hose and liquid tape. Handy now for shutdown. Just short it with a screwdriver.

The comp release valve stayed put.[emoji28]

 

[WKEND LUMBERJAK]

Just tore down the 2150 Carl donated have parts ordered. Whats the best way to fix negligence on exhaust bolts striped and heli-coil failure on cylinder. Heli-coil was not my failure.

 

[67L36Driver]

Make a thread insert from a suitable larger screw/bolt.

 

[WKEND LUMBERJAK]

Make a thread insert from a suitable larger screw/bolt.

Thats what I was thinking . Loctiting in the over sized bolt.

 

[Hedgerow]

Or lock tite....
Too late again...

 

[sawnami]

Just tore down the 2150 Carl donated have parts ordered. Whats the best way to fix negligence on exhaust bolts striped and heli-coil failure on cylinder. Heli-coil was not my failure.

Big-serts by time-sert.

Sent from my SM-N910V

 

[67L36Driver]

Browse thread inserts with your local O'Reilleys counterman.

O'Reilleys and Ace hardware are my go to chainsaw parts suppliers. LOL

 

[WKEND LUMBERJAK]

Browse thread inserts with your local O'Reilleys counterman.

O'Reilleys and Ace hardware are my go to chainsaw parts suppliers. LOL

My OReilly's here is a xxx xxxx Joke. All the counter people know is how to start a car. And you better hope it don't have a manual choke. went in there last week to get a electric fuel pump 2-7 Psi frame mounted 12 volt. they all looked at me like I was from outer space . Did I say they are idiots.

 

[Homelite410]

Just tore down the 2150 Carl donated have parts ordered. Whats the best way to fix negligence on exhaust bolts striped and heli-coil failure on cylinder. Heli-coil was not my failure.

Weld it.

 

[67L36Driver]

Weld it.

Says the fellow with a TIG in his machine shed.........................?

 

[Homelite410]

Nope, no me..

 

[sawnami]

My OReilly's here is a xxx xxxx Joke. All the counter people know is how to start a car. And you better hope it don't have a manual choke. went in there last week to get a electric fuel pump 2-7 Psi frame mounted 12 volt. they all looked at me like I was from outer space . Did I say they are idiots.

I know what you mean. I've known the CEO for 35 years. I'm so tempted to say "Let me give Greg a call and see if he can look it up for me" and watch the look on their face. [emoji57]

Sent from my SM-N910V

 

[workshop]

Well, I'm now Jeepless. Straight up trade for a 2002 F150, 4.2 V-6, 5 speed 4X4.
Now all I've got is Ford stuff. Except for the tractor.