Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[cobey]

It's worth twenty bucks in parts and/or entertainment.

Locked up can be most anything.

Actual scored to death, dirt in the main bearings, tramp metal on the flywheel magnet, frozen recoil pulley, trash in a port, .......

He was wanting like 50 to 75 for it because he sells old saws for wall hangers.
I couldn't got the exact number without offering ..... I did get that the big saws usually get
50 as wall hangers.... there were a couple more in the scrap bin ... in. Horrible shape
But big saws like that would be 20 because of weight..... they didn't act like they would let me pick carcass for parts..... .. that would be cool if they did

 

[cobey]

You did carry home the Echo twin and the white top Husky, right?

It was a very faded 254xp Kenneth needed parts, Steve claimed the Echo before I left town..

 

[cobey]

I will make some more trips.... he may want help with saw
And I got an old PL4 that matches his Remington sighn
I might see if he wants to trade for the 1050?

 

[67L36Driver]

I have a lot of PL/SL parts if you need something.
Although mufflers, clutch covers and good piston/cylinders are scarce.

 

[67L36Driver]

Remington sign?

 

[cobey]

Remington sign?

I will send a pic of his place he is a serious collector!

 

[jetmd]

Good morning Fella's, been off the site for quite some time. Trying to catch up.
It just seems as though summer is sooooo busy. Hope everyone has a good weekend.

 

[WKEND LUMBERJAK]

it is miserable out side.

 

[Homelite410]

took the T out today, I love that thing!

 

[Mo. Jim]

it is miserable out side.

It's nice here at the library.

 

[WKEND LUMBERJAK]

It's nice here at the library.

It's nice and cool in my basement to.

 

[67L36Driver]

Fellow from two blocks over brought a small Poulan by. Plastic housing melted over the sprocket drum. Ground it all away so it can turn again but I can't get the brake spring compressed into its pocket.[emoji35]

I did go down there and cut up the fat end (14-16) of what he cut off the soft maple.

Five trunks out of one spot. Dumb. All growing out in a arch away from each other. Rest needs to come down.

The Jonsavarna got a short test run and I got a small test log.

 

[sawnami]

Well, I feel like a dog chasing a car. Kinda wanted one and now what do I do since I caught one?

Sent from my SM-N910V

 

[67L36Driver]

Yeah, dog cought the car so now what? ROFL

I do not have the physical strength nor the room in the garage to deal with one of them pups.

 

[workshop]

Well, I feel like a dog chasing a car. Kinda wanted one and now what do I do since I caught one?

Sent from my SM-N910V

Wow, where'd you get that Steve. I've got to come see that sometime. After all, you might need some help playing with that one.

 

[67L36Driver]

Heh. The fellow with the 36cc Poulan was impressed. After all the Jonsavarna is twice as big.

 

[67L36Driver]

Post that in the antique saw thread. See if Cliff takes notice.

 

[sawnami]

Wow, where'd you get that Steve. I've got to come see that sometime. After all, you might need some help playing with that one. [emoji23]

Yeah, maybe take turns cranking it. Don't have enough lead in my shorts to even try it today.

Yeah, dog cought the car so now what? ROFL

I do not have the physical strength nor the room in the garage to deal with one of them pups.

Yeah Carl, I may end up setting it outside and throwing a tarp over it. I have no room inside.

Sent from my SM-N910V

 

[cobey]

The 024 fired on a shot of wd 40. The piston looks brand new.....
The plastic is BAD faded..... I might have to give the Orange parts
The hedgerow treatment
The other stihl is a 1985 034..... it needs rings, jug is runnable, top,
Starter, af and cover, and maybe a coil

 

[cobey]

024 and 034