Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[cobey]

CARL............

YER 1050 xp...........
And my score.........

 

[cobey]

A 245 mono..... a bantam remmy...... slx..... super in blue.... 360 part saw

 

[67L36Driver]

The Mono is one of them new 'lay down' models.

How bad is the Homie 360?

And, I have some XL-12 misc if you need something.

 

[cobey]

The muffler is rotted off, the rest is there ......

 

[cobey]

The muffler is rotted off, the rest is there ......

The check up
360 ....... I was shooting WD 40 ..... the thing took off with no muffler!
Sl 245 mono had intermittent spark.... rings weak maybe .... but complete
One slx is very strong...... One needs rings....
Remmy barman...... locked up. Many good parts
Mono........ probably could run with points cleaned

 

[67L36Driver]

Morning midlanders!

Our mr Clarkson has become quite the saw magnet.[emoji6]

 

[chainsawlady]

A 245 mono..... a bantam remmy...... slx..... super in blue.... 360 part saw

cobey
I have new mufflers for 360AO, #A-70784 for 360 Homelites before Lot #C-320. After Lot #C-320 the muffler part number is A-94785, which I don't have. Price for A-70784 new is $46.07 plus shipping. Don't think I have a used one, will check. It would be 1/2 price of new.
[email protected]

 

[67L36Driver]

The muffler is rotted off, the rest is there ......

Don't forget to check the boot on them.

 

[cobey]

Don't forget to check the boot on them.

He he....... there ain't no boot
I have a a few boots left

 

[67L36Driver]

JD 80EVA pops on prime. Then I flooded it. Back in there to check the carb again.

 

[67L36Driver]

He he....... there ain't no boot
I have a a few boots left

Homelite 360 has carb boot.

 

[cobey]

Homelite 360 has carb boot.

It had one... at one time..... but ain't none left, I get two in my tool box
I might put a boot in and see if it go's

 

[SteveSS]

Evening gents. I just got tore into the MS260 Pro that I picked up a while back and wanted to ask some advice. It holds good vac and pressure....steady as a rock. The piston and cylinder are scored on both the intake and exhaust sides, relatively lightly, but still scored. Will a lean saw score on both sides? The crankcase looks pretty dry, but there was a sheen of oil on the piston. I'm hoping to be able to just clean up the cylinder and throw a new piston at it. Thanks guys.

 

[67L36Driver]

Run lean mixture on 50:1. I betcha.

 

[workshop]

Evening gents. I just got tore into the MS260 Pro that I picked up a while back and wanted to ask some advice. It holds good vac and pressure....steady as a rock. The piston and cylinder are scored on both the intake and exhaust sides, relatively lightly, but still scored. Will a lean saw score on both sides? The crankcase looks pretty dry, but there was a sheen of oil on the piston. I'm hoping to be able to just clean up the cylinder and throw a new piston at it. Thanks guys.

I'm no expert, for sure, but I bet it was from factory settings. Put a new piston and rings in it, do a muffler mod, remove the limiters, fatten that critter up to where it wants to really run and run the snot out of it. Or sell it, whichever comes first.
The 260 pro I've got originally had a 5/16 outlet in the muffler. I gutted the muffler and drilled out the outlet to 3/8 then added two more 3/8 holes, one above and one below the original. It's my go to saw now, well, it and the Echo that Allan worked over for me.

 

[workshop]

Oh yeah, and run it at 32/1.

 

[cobey]

Hi Steve.....

 

[workshop]

Hi Steve.....

COBEY!!!!!




















What's up, buddy?

 

[SteveSS]

Good advice. Thanks fellas.

 

[Hedgerow]

Evening gents. I just got tore into the MS260 Pro that I picked up a while back and wanted to ask some advice. It holds good vac and pressure....steady as a rock. The piston and cylinder are scored on both the intake and exhaust sides, relatively lightly, but still scored. Will a lean saw score on both sides? The crankcase looks pretty dry, but there was a sheen of oil on the piston. I'm hoping to be able to just clean up the cylinder and throw a new piston at it. Thanks guys.

Scoring on intake and exhaust side says straight gas...