Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[67L36Driver]

What diameter file do I need for 7/16" chipper?

 

[cobey]

I hit something in a tree we went to get today,
The little roller guide works well once you get your teeth
To its angles........ still got to set the rakers


I'm happy to see you all this weekend


I hope to get good with the grandberg also

 

[WKEND LUMBERJAK]

What diameter file do I need for 7/16" chipper?

I would the same as a 3/8 would work just fine Carl. I sharpened the chain on the Mono the same as i would a 3/8". I used my chain Grinder.

 

[67L36Driver]

I would the same as a 3/8 would work just fine Carl. I sharpened the chain on the Mono the same as i would a 3/8". I used my chain Grinder.

I thought the wheel on my Nick The Grinder is too thin for 7/16".

Did I mention I hate to hand file chain?

Chains get sharpened once around here. Then it's out the door...........

 

[Hedgerow]

What diameter file do I need for 7/16" chipper?

1/4" would get the job done, but the next size up would be better.

 

[sawnami]

What diameter file do I need for 7/16" chipper?

Sent from my SM-N910V

 

[67L36Driver]

9/32"?

I have two saws with 9/16" chain as it turns out.......

 

[67L36Driver]

Morning midlanders!

Going back to bed.

 

[cobey]

Mornin all
Got to head to ft Scott in a bit..........

 

[WKEND LUMBERJAK]

Time to start getting some saws loaded

 

[cobey]

Chad tried to make this load yesterday

 

[cobey]

Time to start getting some saws loaded

When are you coming down Kenneth?

 

[workshop]

Load the truck tonight. Goal is to be on the road by 6:00am.

 

[Hedgerow]

I gotta head into the plant today, but hope to escape before dark.

 

[sawnami]

Load the truck tonight. Goal is to be on the road by 6:00am.

Same here. Looks like I'm gonna have to start the culling process. I hate having them bounce around in the trailer so I need to figure a way to secure them.

The gentleman that I met last week that will be there filled his trailer with sawdust and set his saws in it with a tarp over them. The bad thing is his tarp came loose on the way last week and every orifice on every saw is filled with sawdust. He doesn't run them so it's not a big deal to him.

Sent from my SM-N910V

 

[sunfish]

Guys, I'm not goin to make Ft Scott. I was in Kansas City 4 days last weekend, St.Louis yesterday and have had company here for 10 days. I'm beat to death and can't get on the road again anytime soon.

Y'all have a good one & I'll try to catch the next GTG.

 

[67L36Driver]

Same here. Looks like I'm gonna have to start the culling process. I hate having them bounce around in the trailer so I need to figure a way to secure them.

The gentleman that I met last week that will be there filled his trailer with sawdust and set his saws in it with a tarp over them. The bad thing is his tarp came loose on the way last week and every orifice on every saw is filled with sawdust. He doesn't run them so it's not a big deal to him.

Sent from my SM-N910V

Hmmmmm. I think I'll hit an ATM and rent a trailer if that load will be on site!

Lots of big, yummy oldies in there!

 

[Hedgerow]

Same here. Looks like I'm gonna have to start the culling process. I hate having them bounce around in the trailer so I need to figure a way to secure them.

The gentleman that I met last week that will be there filled his trailer with sawdust and set his saws in it with a tarp over them. The bad thing is his tarp came loose on the way last week and every orifice on every saw is filled with sawdust. He doesn't run them so it's not a big deal to him.

Sent from my SM-N910V

Stuffit spray foam..
Lol..

 

[Homelite410]

Same here. Looks like I'm gonna have to start the culling process.

You can cull the 750 and 2100 my way...[emoji8]

 

[Mrs.A]

Well the AWOL clan is on the road. See ya in Fort Scott.