Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[sawnami]

I'd love to do a 28" bar like that for my 9010. That would would look quite sexy (and would be the show bar). As it is that Creamsickle looked just fine and much better now!



I'm going to find Dad a nice '68-72 Chebby truck. We WILL build (or buy I really don't care) a nice Nova, Chevelle, Biscayne, GTO/LeMans, Monte Carlo or Charger someday but we both like the '68-72 trucks. I'd like to do a resto-mod with a divorced T-case (4x4 swap) and either a Cummins, Duramax or IH DT466 heart transplant with a 4-6spd hand-shaker. I could also see finding a 8.1l crate engine like whats in Steve's Avalanche as that would work equally well except for the mileage dept...

HT502 crate engine.

 

[shorthunter]

That's a bad deal, sorry for your loss

Thanks Cobey. I haven't dug through the wreckage but I believe that everything lost can be replaced.

 

[sawnami]

Thanks Cobey. I haven't dug through the wreckage but I believe that everything lost can be replaced.

Sorry to hear that. How extensive was the damage?

 

[shorthunter]

The barn is toast. I believe that I can salvage a 450r frame and my small block Chevy. Otherwise, the contents are toast as well.

It is ironic that I just ordered the parts necessary to fix half of the saws that I lost

 

[67L36Driver]

Morning midlanders!

 

[WKEND LUMBERJAK]

Morning Carl. That's tough Brandon sorry to hear.

 

[Hinerman]

Morning everybody. Took Sam to the orthodontist yesterday; he is getting braces next Monday. He is excited. Have a good day.

 

[Hedgerow]

That excitement about braces will wear off pretty quick..
Lol..

 

[Homelite410]

Morning everybody. Took Sam to the orthodontist yesterday; he is getting braces next Monday. He is excited. Have a good day.

No more snickers fo a while....

 

[Mo. Jim]

Morning one and all, still in Iowa, plan on going home this afternoon. Had a little sprinkle here earlier, not enough to settle the dust.

 

[nstueve]

Morning all! Saw that some of you were talking locust a while back. Alex got poked by a bunch that I threw into the creek last weekend! Had to get those locust thorns off the driveway and away from tires.

Nate brought the woodmizer and cut this up.

Man those bottom beams are heavy, thank god hoskey's fixed my forks for me.



Sent from my iPhone using Tapatalk

 

[Mo. Jim]

Working on an awful plastic homelite........
46 cc of pure turd......
Finally got it to act like a real saw.....
And my exhaust port melts the top cover
And that throttle cable looping over the plastic intake
Bad stuff, the air filter and carb shakes so bad it's no wonder why the carbs loosen up

Cobey if you need any parts for this saw I need a picture as there is a older and newer model of these saws.

 

[67L36Driver]

Us townies are back in the saw testing game.[emoji6]

Mostly a straight piece of 16" maple. Cut it in fourths to unload it.

Torment the old neighbor who complains about the saw chips.[emoji48]

 

[cobey]

Cobey if you need any parts for this saw I need a picture as there is a older and newer model of these saws.

I think I can finish with what I have now
Thanks much Jim

 

[Hedgerow]

Us townies are back in the saw testing game.[emoji6]
View attachment 454855
Mostly a straight piece of 16" maple. Cut it in fourths to unload it.

Torment the old neighbor who complains about the saw chips.[emoji48]

That's good test wood.

 

[67L36Driver]

You betcha! Make near white chips flying about the neighborhood.[emoji56]

J-red 670 chewed right thru it. I flooded the Olympyk or I would have used him.[emoji22]

 

[workshop]

Afternoon everybody.

 

[Mo. Jim]

Afternoon everybody.

Afternoon Steve.

 

[67L36Driver]

Wish Cobey lived closer. I have some 7/16" loops need filed.
Need to get a 1/4" file at the hardware store first.

 

[67L36Driver]

Used the Poulan 3300 w/16" to test cut nine loops of 3/8" out of the box Steve left here. Got 'em stacked on the peg board ready!