Old Carb parts needed: Al or other "experts"

[oldsaw]

Okay, my old Monkey Wards saw isn't starting and I figured out the problem. The fuel pump is out in the carb. It is a Lauson Power Products carb with the only identifying numbers being 207 and 6J26. The pump is an oval rubber bladder that is about an inch and a half long, a 1/4" or so wide, and about 3/16 deep. There is a crack around the base of it, so, no vacuum, no fuel, no go.

Help me please, Chopwood just sent me a really nice chain, and now I'm stuck again.

 

[Al Smith]

Holy moly,I haven't a clue what carb it is.Lewis B ,made a diaphragm for an old saw.That a peek in the search of this site,as I think he listed the material he used.

 

[oldsaw]

This thing is an orange oval rubber tube

that is sealed on one end and flanged on the other. It is cracked around the flange. I may have to try to glue it up with something. I've never seen a piece like it before.

The diaphragm is a bit stiff, but no holes and is still serviceable.

Wow, one that is over Al's head. I'm deep in the jungle now.

 

[Al Smith]

Put a picture of that old relic on here if you could .A power products Ah 47-58 and 81 were old kart engines.I haven't seen any since the mid 60's when I was a teenager,but I'd bet a Tillotson Hl would fit.Never say die

 

[Fish]

Tecumseh= Lauson