I found one! Almost..Part 2- ohhh26

[nedsim]

I'm still a fan of hemostats for fuel/oil lines.

I just did the fuel and impulse lines on both an 024 and an 026. I got it done with a pair of pliers with finer jaws than those shown above, but just barely. Large hemostats would have been much better. The fuel lines were easy; the impulse on the 024, not too bad. But the impulse on the 026 was just barely possible with pliers and luck.

 

[dav2no1]

I have the same set -- it won't work for small engines. I did tap the hose end for a Schrader valve and tried with a regular tire valve core. Better, but not good enuf. Need to order the right valve core with a soft spring.

Well damn! I did just see another thread on here that said similar to what you said. I looked and thought it might work..has valve on hose end.



Someone in the other thread suggested this one. Think that thread was pretty old..like 2014.. is this still a good option or can anyone suggest other options?

https://www.amazon.com/OTC-5605-Del...FSXI/ref=pd_sxp_grid_pt_2_2?tag=forumyield-20