Oregon Chainsaw Bar 27" 270GNDD196

[lawnmowertech37]

Trouble with the llama?

if you notice the post is gone thats cause i thank the moderators that monitor this site for removing such a post

thanks darin


calvin


besides i have these bars on our store and im telling who ever even if someone from out of the blue came and browsed the old sprocket system is written all over that product and i have the price very low too $ 40.00

 

[cbfarmall]

I picked up one of these bars from Calvin. I forgot that I already had a Homelite-badged Oregon 28" powermatch for my 750, but nevermind that. This bar looks good. I tried to use a 93DL chain with my 8-tooth rim but it wouldn't fit, so I had to downgrade to the 7-tooth. It was nice of Homelite to provide a notch in the flywheel to lock the crank.

Calvin is a straight up guy, and I've already been back to him for other parts.

Chris B.

 

[SawTroll]

Looks really cool!

Forgot to ask earlier, is there a 13 teeth nose on that bar?

 

[cbfarmall]

12 tooth tip.

Chris B.

 

[lawnmowertech37]

Thanks

thanks for the compliment i still have two of these available and i have it clearly marked old sprocket system if you cannot find it on our site here is the direct link to it



http://www.cmsmallengines.net/oregon-power-match-chainsaw-bar-27-3-8-pitch-050-gauge-270gndd196-old-sprocket-system-p3468.html



i do have them at the below dealer cost since this is a old stock bar for older saws


would work good on them


thanks


calvin

i do have some other oregon older bars here as well but these are the hot ones the others are smaller in size


i will post them later on store

 

[cbfarmall]

This bar will also work on the old Jonsered mount. I swap bars back and forth between my 650/750 and 910/920. Not sure that all the DL counts will be the same, though.

Chris B.

 

[SawTroll]

This bar will also work on the old Jonsered mount. I swap bars back and forth between my 650/750 and 910/920. Not sure that all the DL counts will be the same, though.

Chris B.

See post 3 on this tread!

 

[cbfarmall]

Sorry, don't remember seeing it mentioned. Guess I should look before I speak.

Chris B.

 

[lawnmowertech37]

look at what i found in my shop this evening ...

is this a rim ?

this is the mount up for it


below is another bar i found one of several dont know what it fits but its small in overall length about 14 or 16 but the mount up pattern i dont recognize if anyone can tell me if this bar is made today or is it obsolete or is it fit anything that is sold today ?

the tip of it here below

thanks calvin


and what can i get out of it if i place it on the store ?

 

[Former Saw Builder]

The D196 is an old Homelite mount, but it fits several older Jonsereds as well - with maybe some filing inside the slot.....

They will go right onto the older Jonsereds like the 70Es the 910s you don't have to file anything.

 

[SawTroll]

They will go right onto the older Jonsereds like the 70Es the 910s you don't have to file anything.

About what I believed - but the specs for the slot is halv a millimeter less on the D196, so it could be nesessary in some cases.......

I have heard of cases where D009 bars fit those ol' Jonsereds as well, and those are supposed to have a full mm narrower slot than the D024.

 

[Edge & Engine]

Oregon D196 Saw Bar Motor Mount:

Alpina: P55, P65, 070, 070S
Castor: C3, 616, CP-70, CP-70 SUPER, ELECTRIC 70
Echo: CS-900, CS-1001
Homelite: XL-12, SUPER XL, 330, 350, 360, 410, 450, 460, 550, 400, V-1955, 650, 750 SUPER, XL-925, 850, 700, 800, 900, 922, 923
Jonsereds: 60, 66, 70, 75, 80, 81, 90, 110, 111, 601, 621, 751, 820, 910, 920, 920 SUPER, 1020, 77
Olympic (Oleo-Mac): 250A, 251, 252, 254, 254F, 260, 261, 272, 280, 460A SUPER, 461, 480A SUPER, 481, 482, 486
Pioneer: P-25, P-38, P-38S, P-39, P-40, P-41, P-41S, P-42HP, P-42S, P-50, P-51, P-51S, P-52S, P-60, P-61, P-61S, P-62HP, Farmsaw, Farmsaw-S, Farmsaw II, Farmlite, 515
Remington: PL-4, PL-5, PL-55, SL-4, SL-9, SL-10, SL-11, SL-14, SL-16, Logger, Woodsman
Poulan: 6900, 7700, 8500
Topso: E500, E510, E600, E601, E610, E611, E700, E711

 

[lawnmowertech37]

bars are sold so dont need to click on the link it will show out of stock
thanks

calvin

 

[Former Saw Builder]

Those bars fit my old Jonsereds that make them a good deal to me...

 

[Select_cut_forester]

not this bar this bar is a 3/8" pitch .050 gauge what im going to do is figure out how to put these chain bars on our site i may be changing some things around and placing oregon bars on oregon category and under each type of bar such as power match pro. laser tip plus pro and so on then under them headings will be the manufacture name of the saw and that is where the bars will be located and will say the model #s etc.


thats the only way i know how to do this i may start on it tonight and get the outline on how i want it to look but i will call you and give you the info you need for the other bar you are seeking thanks

calvin

I know this thread is very old bit does anyone know where I could find one of these bars for sale