Sold Oregon roller nose bar

[Hows57]

I not sure on the mount. Bar is 40" overall in length. The tip is solid. It has an old repair and a crack at the tip. I only put one rivet in. Looks like it could be fully restored by the right guy. Any help on the mount would be appreciated. Open to offers or trade possibly.

 

[Jon1212]

@Definitive Dave

 

[Bill G]

I not sure on the mount.............Any help on the mount would be appreciated. Open to offers or trade possibly.

I will look and be back in 15 minutes

 

[Bill G]

It is a 36" bar , 058 gauge for the larger McCulloch's such as the 797

 

[Hows57]

It is a 36" bar , 058 gauge for the larger McCulloch's such as the 797

I tried a used piece of .063 gauge chain in the bar and it fit. I also tried a new one. It almost fit. I was told many of the fallers would switch from .058 to .063 once the bar loosened up.

 

[Bill G]

I am sure they did. Originally she was .058 though