parts parts parts

[lowryder]

anyone have any idea where i can find parts for a 1975 asplundh whisper chipper?16" with a 330 engine.

 

[lawson's tree s]

engine parts you can get from any napa parts store . chipper blades you can get from bailey's , sherrill, zenith cutter.

 

[chipdelia]

anyone have any idea where i can find parts for a 1975 asplundh whisper chipper?16" with a 330 engine.

What parts are you looking for, I have had to source lots of stuff for the '74. Altec's prices were very high for standard heavy duty machine parts.

Chip

 

[lowryder]

What parts are you looking for, I have had to source lots of stuff for the '74. Altec's prices were very high for standard heavy duty machine parts.

Chip

I just recently had to replace one of the bearings on the blower side of the drum.........I did find that locally......I would like to know where I may be able to find other drum housing parts as well as a floor plate and many other parts........It would be nice to know some resources........any help would be greatly appreciated.........

 

[rbtree]

I'm guessing that if Altec can't help you, you'd need to get parts like like fabricated. Altec, at the very least, should have schematics of the cutter assembly.

 

[lowryder]

I'm guessing that if Altec can't help you, you'd need to get parts like like fabricated. Altec, at the very least, should have schematics of the cutter assembly.

I have the original manual that shows a complete diagram of entire drum assembly.......what i need is a resource for parts......I called Altec and they said because it was manufactured before I believe 1977 that I would need to call a 800 number for parts assistance........needless to say ......it was of no help.........Im kind of thinking im running out of places to possibly look for parts........

 

[OLD CHIPMONK]

Send me some pictures. I've got an old one, just for parts. Cutter head, shute, fan & engine ( 330 v-8, industrial Ford ) Bearings are good . [email protected].

 

[juststumps]

I just recently had to replace one of the bearings on the blower side of the drum.........I did find that locally......I would like to know where I may be able to find other drum housing parts as well as a floor plate and many other parts........It would be nice to know some resources........any help would be greatly appreciated.........

I'm guessing that if Altec can't help you, you'd need to get parts like like fabricated. Altec, at the very least, should have schematics of the cutter assembly.

I have the original manual that shows a complete diagram of entire drum assembly.......what i need is a resource for parts......I called Altec and they said because it was manufactured before I believe 1977 that I would need to call a 800 number for parts assistance........needless to say ......it was of no help.........Im kind of thinking im running out of places to possibly look for parts........

HELLO !!! unless you can find a junk one laying around !!! there are no parts !!! done,, gone .. finished,,over !!!

your going to do like rbtree said,, have the stuff made....or repaired at a machine shop,, weld shop, or fabricator... engine stuff, belts,, bearings.. and so on,, are generic.... the thing is 30 yrs old... in stock parts for that chipper,, were probably gone 25 years ago... jmho

 

[chipdelia]

I have the original manual that shows a complete diagram of entire drum assembly.......what i need is a resource for parts......I called Altec and they said because it was manufactured before I believe 1977 that I would need to call a 800 number for parts assistance........needless to say ......it was of no help.........Im kind of thinking im running out of places to possibly look for parts........

For any of the heavy duty drive parts like the tapered sleeve that holds the fly wheel on use https://www.motionindustries.com. They helped me find all the parts I needed and at 30% of Altec's prices.

Most of the sheet metal is easy for a metal shop to put together if you have a reasonable sample. I had parts made for the price of a box of Donuts and a box of Joe at a metal fabricator.

Napa or any truck parts shop will be able to get the engine parts. The 330 V8 was used in F600 trucks and big U-Hauls in the Seventies.

Not much has changed in the design of these units over the years, so parts are pretty interchangeable from model year to model year, if you find one for parts.

What parts are you looking for?

I would really like to get a copy of your parts and operator manual. My e-mail is [email protected]

Thanks,
Chip

 

[lowryder]

HELLO !!! unless you can find a junk one laying around !!! there are no parts !!! done,, gone .. finished,,over !!!

your going to do like rbtree said,, have the stuff made....or repaired at a machine shop,, weld shop, or fabricator... engine stuff, belts,, bearings.. and so on,, are generic.... the thing is 30 yrs old... in stock parts for that chipper,, were probably gone 25 years ago... jmho

HELLO!!! I do understand that I will not find in stock parts.......ummm go figure....I have had all metal parts basically refabricated and replaced..........what I was basically referencing was exactly what OLD CHIPMONK has pointed out.......someone with an old one not being used........that can be parted out.....(imagine that)...I do appreciate your response........

 

[lowryder]

Send me some pictures. I've got an old one, just for parts. Cutter head, shute, fan & engine ( 330 v-8, industrial Ford ) Bearings are good . [email protected].

I will send some pics........I do appreciate your response......

 

[bfd1909]

HI LOWRYDER did you ever get that manual on pdf ? could you send me a copy please [email protected]

 

[chipmonster]

Blower Housing

I have a1986 Asphlund Whisper Chipper (12") and I am looking for the blower housing (both inner and outer shells). Anyone know where I can find a used set? Thanks.

 

[bfd1909]

I have a1986 Asphlund Whisper Chipper (12") and I am looking for the blower housing (both inner and outer shells). Anyone know where I can find a used set? Thanks.

there was one with no motor I think on kijiji.ca ontario canada I think it was in the bellville area

 

[bfd1909]

I have a JEY whisper chipper 1989 model with a hercules 4 cylinder engine and I could use a manual for this engine its an G1600 model if anyone has one they could copy and send to me

 

[chipmonster]

Thanks for the info..... I will check it out.