pictures of the 041 ave super with 048 piston in it

[Stihl 041 super]

This is what you guys asked for the pics of the special 041 with 048 piston in it.

 

[Lawn Masters]

I have to ask did someone bore out the the jug? I get the feeling that may be the case, or perhaps an 051 jug and piston.

 

[Ax-man]

You have asked many times what the value of this saw is. How much did you pay for it????? What do you think it is worth ????

Larry

 

[whatsnext]

Is that JB Weld filling that extra exhaust port?

 

[Al Smith]

Is that JB Weld filling that extra exhaust port?

One port is exhaust,the other is intake.Isn't that a goofy way to port an engine?

 

[Mange]

I had one identical to this one, there is a thead here of me asking what the **** this is, and I seem to remember we came ti the conclusion it was a 041.
I sold it, but will ask the byer to have a look.

Mange.

 

[Ax-man]

Mange, that pic is way too small, could you load a bigger one so I can get a good look at that saw.

Larry

 

[whatsnext]

One port is exhaust,the other is intake.Isn't that a goofy way to port an engine?

Al, If that's the case why does picture four show the port filled with what looks like JB Weld?

 

[Stihl 041 super]

piston

Al, If that's the case why does picture four show the port filled with what looks like JB Weld?

Thats the piston closing the port not jb weld.

 

[Al Smith]

It is a little misleading.Jpg 25 shows the piston down,exhaust open,intake closed.Jpg 26 shows the piston up,intake open ,exhaust closed.It's a bit confusing with the ports in line.The intake is toward the crankcase,the exhaust toward the cylinder.As I said,what a goofy design.It obviously works though.As I understand it,this older design did not lend itself to the super high rpm's most of use associate with Stihl.

 

[Stihl 041 super]

It is a little misleading.Jpg 25 shows the piston down,exhaust open,intake closed.Jpg 26 shows the piston up,intake open ,exhaust closed.It's a bit confusing with the ports in line.The intake is toward the crankcase,the exhaust toward the cylinder.As I said,what a goofy design.It obviously works though.As I understand it,this older design did not lend itself to the super high rpm's most of use associate with Stihl.

The jpg 25 is a picture of the 041 ave super, the other picture(jpg26)
is a picture of a regular 041 av (61cc)

 

[whatsnext]

Thats the piston closing the port not jb weld.

My mistake then.

 

[Mange]

Mange, that pic is way too small, could you load a bigger one so I can get a good look at that saw.

Larry

You are right, It is gone, gone, gone.

 

[Stihl 041 super]

pics

To make manges picture bigger just put your cursor or pointer on the pic
and wait until you see a picture in the lower right hand corner then click it the picture will get way bigger.