Pioneer 1130

[ross_scott]

I emailed the IPL. Did you get it ?

Bill

yes I got the first three pages you sent I have those pages stored on my hard drive thankyou for helping me out

Well, glad to hear it was a simple thing like that causing the problem, have fun with the saw.

Cost me $75 for the repairs and diagnostics which was $1 less than what I paid for it (paid $76 for it on the trademe auction site)

 

[Bill G]

I am glad the first 3 pages came through. aThe last 3 pages of the parts lists have been emailed. I hate to spend an hour only to to find out they are unreadable so I send them at several intervals.

Bill

 

[Bill G]

Well this is what I was afraid of. I just spent 30 minutes try to email the rest of the pages and twice they have come back.

Bill

 

[Bill G]

Ross,

I tried again. All emails are being bounced. I give up.

Bill

 

[ross_scott]

it maybe the filesize that is affecting the success of sending to hotmail the first three pages were readable but have not recieved the other ones you have tried to send

here is my private email address linda_ross[@]ihug.co.nz (take out the brackets) you should be able to send to that address without bouncing or alternatively if you have MSN messenger you can add the hotmail address and we can do some file transfers if that will be easier

 

[Bill G]

Well hopefully the second email address you gave worked. I ent the three pages that came from a original Pioneer manual and the last 3 pages from the parts list. At this point you should have 9 pages total.

Bill

 

[ross_scott]

Well hopefully the second email address you gave worked. I ent the three pages that came from a original Pioneer manual and the last 3 pages from the parts list. At this point you should have 9 pages total.

Bill

Hi Bill
Good news I got the two emails with the PDF's and the one with word format attached with absolutely no problems at all in total I have the nine pages

Thankyou very very much for the effort you put in by taking the time to scan and send the manual for me it is highly appreciated

 

[ross_scott]

Got the saw back today and it is now running like a charm I can even start it without locking the throttle to full when cold starting

 

[Bill G]

If you need any other manuals let me know.
Bill

 

[ross_scott]

If you need any other manuals let me know.
Bill

I will do that
Cheers for your help Bill

 

[doc874]

Your 1130 looks on the outer casement to be exactly identical to my poineer 1110, it was also trying to set-up the fuel mixture settings and idle but i have succeded, my 1110 runs great, parts are hard to fine for this model being 30+ yrs old but i managed to score a condensor and ignition module just in case. Your's is nicer looking. I'll try and figure out how to post a jpeg on this site and post a pic for ya.

 

[doc874]

I think i got this Jpeg attachment thing done so here goes, it only cost me 1 yr off my life by the time i figured it out. I posted both poineer's, P26 and the 1110 model. Hope this works!!

 

[ross_scott]

very nice to see old saws still up and running

 

[Lawn Masters]

I have to wonder if some parts from a homelite XL series saw wont fit on that one's body. they look close enough that I'm guessing most parts will interchange.