Pioneer 2073 bar mount

[Slab City Woodchuck]

i have an old Pioneer 2073 from my grandfather. the bar that is on it is the old wheel nose bar, but the thing is worn out. i have done a lot of looking and cannot come up with the bar mount. believe it is the 3/8 .050 chain. just want to make sure i have the right bar mount before i go order one! any help would be much appreciated!

 

[pioneerguy600]

From memory the 2073 was close or about the same as the P25 and it used the D007 mount bars. If your saw has 3/8" dia bar studs the D007 should fit.

 

[lostone]

http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/a7e5f33f0403144488256b000018426b?OpenDocument
http://www.acresinternet.com/cscc.nsf/14711d8004b6ea7c88256e0c0001ff32/eb5cdbe2ec67964188256e0d00525d23?OpenDocument
Wouldn't that make it a Husky small mount? I know I use Husky small mount on my Homelite Super EZ's. I also use Husky large mount on my Homelite SXL Auto but you have to take a file where the bar studs are and open them up about .015.

 

[Slab City Woodchuck]

thanks so much for the info! really helps. trying to get the old saw going again. its been fun to tune it up, and time now to put it to work! (i've been cleaning up from the snow, thus the delayed response).

 

[pioneerguy600]

The KO95 mount will work if the saw has 5/16" bar studs, several other bar mounts can be made to work with just a small amount of file work and drilling or grinding the oil delivery holes to align with the bar pad of the crankcase.