Want to Buy ported ms 460

[SAWMIKAZE]

I wanna give one a spin and see how it stacks up in the real world against my 461..lemme know what you got ill buy/trade or whatever works out

 

[fin460]

Hey I have a ms460 being ported right now. I will let you run it a few weeks, and then you can send me the 461r ha ha.

I will PM you

 

[showrguy]

I wanna give one a spin and see how it stacks up in the real world against my 461..lemme know what you got ill buy/trade or whatever works out

you comin to the pa. gtg. ??
i got a 460 that brad did a few years ago,,,,,,,she runs pretty sweet...
your welcome to take it for a test drive...

 

[nmurph]

I wanna give one a spin and see how it stacks up in the real world against my 461..lemme know what you got ill buy/trade or whatever works out

A 460 built by Randy (or most builders) will put a serious smack down on a stock 461. I have a MM 460 and it will pull a 32" buried in oak like a bull in a china shop.

 

[SAWMIKAZE]

My 461 is ported and after broken in it got very strong..i just wanna see the differences for myself

 

[nmurph]

My 461 is ported and after broken in it got very strong..i just wanna see the differences for myself

Then the differences will be small.

 

[Jacob J.]

I agree- the difference between a ported 460 and 461 will be very hard to detect. The 461 does have operating characteristics that lend itself to user comfort, like the anti-vibe and RPM range where it develops peak power. I have a ported 046 that Randy helped me with that's a real monster though. It's running an 064 piston and rings. It consistently holds 11-11.5k in the cut with a sharp chain- whether you're running a 20" bar buried or a 36" bar.

 

[SAWMIKAZE]

I always hear a 460 is more of a hot-rod , and also some 460s are studs and some are duds ported..i just tuned my 461 to 14700 and it seems to like that area.

 

[mdavlee]

I've only done one 460 I would call a hot rod. It was a freak and was faster in 25" maple than the ported 288 and 395 The 461s I ran that Randy ported were nicer to me than the 046/460s.

 

[fordf150]

I have a 460 and 461 both built by randy and the 461 is stonger. It will handle a grabby chain better



Fastleo151 posted under my name. I wish I had those saws. I am stuck with a fleet of made in china dolmars