DisturbeD
ArboristSite Operative
In need of a good used poulan 245a coil.
You can become a Supporting Member which comes with a decal or just click here to donate.
Points coil or solid state?
So you need a recoil and not a coil?
So you need a recoil and not a coil?
Under that recoil it will either be points or no points. The coils are not interchangeable between the two.Nope need the coil. Found this saw with no coil. The rest of it looks great should be a good running saw if I can get spark.
Guess I'll have to look at it tomorrow as see. Which it has if they came with 2 different set ups.Under that recoil it will either be points or no points. The coils are not interchangeable between the two.
Under that recoil it will either be points or no points. The coils are not interchangeable between the two.
If it's a points saw, you can replace the points with an Oregon solid state module. Gap 0.008" (which is 2x the thickness of 20# copy paper). Otherwise, you may need to remove the recoil to get to the points if you need to do any work there.
This is good. Very rare for them to go bad. Let me look this evening when I get home or possibly tomorrow to see if I have one available if you are still needing it. Personally I have had no good luck with aftermarket.Well the sticker on the flywheel cover says solid state ignition.
This one I dont think went bad a previous owner robbed it is all I'm sure. It just didn't have one when I ended up with the saw.This is good. Very rare for them to go bad. Let me look this evening when I get home or possibly tomorrow to see if I have one available if you are still needing it.
Enter your email address to join: