Poulan 3000/3300/3450 Same carb?

[jack696969]

Well there you go. Easy enough.

Why didnt you say that from get go.

Cus that carburetor don't belong on it lol work to cut wood

 

[RedneckChainsawRepair]

Cus that carburetor don't belong on it lol work to cut wood

Which walbro? Put another one on there then.

 

[jack696969]

Which walbro? Put another one on there then.

I got an Chinese one comeing we'll see if it works

 

[RedneckChainsawRepair]

I got an Chinese one comeing we'll see if it works

I got alot of 49's. Some never kitted just pulled. I could install and test a used out. I could rebuild one put on a saw and test.

But then you got carb cost, kit cost, shipping cost and my labor cost for time. IMO not worth it in long run. Need to do yourself.

 

[jack696969]

Which walbro? Put another one on there then.

Put same carburetor not same on it still run on choke idk now ?

 

[jack696969]

No clue.

Why not rebuild the HDA 49 they come with or buy one of those. https://www.ereplacementparts.com/repair-kit-p-833358.html



View attachment 1155299
View attachment 1155298

What link to this carburetor

 

[RedneckChainsawRepair]

What link to this carburetor

There is no link to my carb. That was a link to the rebuild kit for the hda49 carbs. The OEM carbs are NLA new.

1. I can rebuild one here in my bin and test on a saw of mine that runs or 2. even just pull a carb that hasnt been rebuilt off a runner I have here as is with old kit still in it ( it may or may not last some time without having a new kit put in it) .
I always kit them if it is coming off for something. That would also cost labor and kit cost if wanted that done to carb. The first way is going to have labor charge involved too.

What happened to the one you ordered? I dont even know of a china carb in hda49 for these that you said you ordered.
But never had to look either. Never had a 49 fail to take to a rebuild.

I thought you said the saw ran great with a test carb you had there from another saw?

 

[RedneckChainsawRepair]

hda carb how to info.

 

[RedneckChainsawRepair]

feebay guy says rebuilt one. Wish they would have stated if new rebuild kit installed. I guess you assume they did. https://www.ebay.com/itm/3151847630...Qbe0cTnHG9ZY4KauKQH_JPshKiPKySSRoCrEoQAvD_BwE

 

[RedneckChainsawRepair]

Here is a NOS carb. Just listed wrong. pics show hda49 not a hd49 as listed https://www.ebay.com/itm/404436182909

 

[jack696969]

No clue.

Why not rebuild the HDA 49 they come with or buy one of those. https://www.ereplacementparts.com/repair-kit-p-833358.html



View attachment 1155299
View attachment 1155298

We're can I get this carburetor

 

[jack696969]

There is no link to my carb. That was a link to the rebuild kit for the hda49 carbs. The OEM carbs are NLA new.

1. I can rebuild one here in my bin and test on a saw of mine that runs or 2. even just pull a carb that hasnt been rebuilt off a runner I have here as is with old kit still in it ( it may or may not last some time without having a new kit put in it) .
I always kit them if it is coming off for something. That would also cost labor and kit cost if wanted that done to carb. The first way is going to have labor charge involved too.

What happened to the one you ordered? I dont even know of a china carb in hda49 for these that you said you ordered.
But never had to look either. Never had a 49 fail to take to a rebuild.

I thought you said the saw ran great with a test carb you had there from

There is no link to my carb. That was a link to the rebuild kit for the hda49 carbs. The OEM carbs are NLA new.

1. I can rebuild one here in my bin and test on a saw of mine that runs or 2. even just pull a carb that hasnt been rebuilt off a runner I have here as is with old kit still in it ( it may or may not last some time without having a new kit put in it) .
I always kit them if it is coming off for something. That would also cost labor and kit cost if wanted that done to carb. The first way is going to have labor charge involved too.

What happened to the one you ordered? I dont even know of a china carb in hda49 for these that you said you ordered.
But never had to look either. Never had a 49 fail to take to a rebuild.

I thought you said the saw ran great with a test carb you had there from another saw?

I got 1 off ebay they said was rebuild dus same thing as mine

 

[RedneckChainsawRepair]

We're can I get this carburetor

How do you keep missing this NOS carb I posted. Click the link. https://www.ebay.com/itm/4044361829...d=&campid=5338413729&toolid=10001&mpt=7529883

 

[jack696969]

How do you keep missing this NOS carb I posted. Click the link. https://www.ebay.com/itm/4044361829...d=&campid=5338413729&toolid=10001&mpt=7529883

Nice but that more then what payed for saw 20 bucks

 

[RedneckChainsawRepair]

Nice but that more then what payed for saw 20 bucks

So what you paid has no bearing. Gl then.

Used going to be 40 rebuilt. Least NOS you know new.

I'm done here.

 

[jack696969]

So what you paid has no bearing. Gl then.

Used going to be 40 rebuilt. Least NOS you know new.

I'm done here.

Got a carburetor to work .