Poulan Pro 405 what’s it worth????

[Whitelightnin]

Hey guys I have a nice Poulan Pro 405 saw. Canada made with pristine piston and over 180 compression. It has chain brake handle but not the band. The gas and oil caps are tight so you have to remove them with a pair of pliers. I rebuilt carb recently and she runs great. Obviously this is a vintage saw from back when Poulan was a quality name brand instead of the cheap throw away saws they are today. I would keep her but I already have 2 Pioneer farm saws and need the money to put towards my old ‘52 Chevy restoration. So from what info I have on it and judging by the pics what would you guys estimate its worth at?

 

[snobdds]

It's a good saw, if everything is in good shape. There are no parts support for these anymore. So it's really only going to appeal to a collector or someone that doesn't cut a lot with it. If it breaks, it's a boat anchor.

It's only real downsides are weight and the plastic starter cover and parts.

I know it's a pain to take the muffler off, but how does the piston look? What condition is the air filter and rubber boot below the air filter? I might be interested if those two things are in good shape.