Problem with Vemeer 222 Stump Grinder

[Eagle1]

Hey all. Happy TG Day. I have a question about my vemeer stump grinder 222. I have just noticed that only 1 tirel is putting out traction. The other is not. Both wheels are locked for traction. Any suggustions??

Thanks. Eat Today the Turkey.

 

[Eagle1]

Tire. sorry

 

[DDM]

How do the Tires Lock in on that model? Isnt it possible to unlock one so you can get a tighter turning radious? Does this model have one or 2 hydraulic motors?

 

[Eagle1]

I am not sure about 1 or 2 hydr. motors. Yes, you can lock only one tire is desired. You pull out alittle T pin near the hub. Both are locked in and still only 1 leg?

Joe

 

[DDM]

If you only have 1 Drive motor and 1 wheel is pulling you have a problem with your Lock Watch your axle and your hub while moving the machine you should be able to spot where its Broken or splipping.

 

[Plyscamp]

The "T" pin engages to a hub on the Axle. This hub is secued to the axle with a roll pin. Most likley the roll pin has sheared and needs to be replaced. I alway's carry a spare in my truck. In 1,100 hours I have sheared 3 of them.

Hope this helps
Gordy

 

[Eagle1]

That is waht is was. After I clean up the bottom of the machine and jacking up one side. I saw it.
Thanks for your help though. you were correct !!