Remington Mighty Mite Bantam: starter mechanism

[GAD]

Does anyone know where or if these parts (drum and cross piece with two piece T end) can be found:

The first is the drum (stripped or worn out) that is bolted to the fly / fan wheel and is physically engaged by parts of the starter pulley shown (broken) in the second picture.

The second picture is within the starter pulley housing. The piece that is broken is the little metal cross piece held in place by the slotted screw and washer. The flat metal C piece is held on by the spring which slides onto the broken cross piece and is held in place by a two piece T end (broken and missing from the left side) in the picture, the right side is good. The left should look the same as the right.

Thanks


View attachment 287892View attachment 287893

 

[Guido Salvage]

I think I picked up one of these Friday. Rope is pulled out and you have to split the saw to investigate. I will look at it tonight and if it has what you need I will let you know.

 

[pioneerguy600]

Those Fairbanks Morse friction shoe setups are still available for many saws, we will let Guido look for you first.

 

[Guido Salvage]

Mine is a Mighty Mite (not a Bantam), below is a picture. Don't really have time to tear into it with the GTG this weekend and the mother in law coming Wednesday, let me know if you want the whole thing as is.