Saw chain conversion, .375 > .325

[JR Hill]

A few years back I purchased a Husq T435 as a replacement for a worn out limbing saw. The T435 uses .375 LP chain, grrr. But I still have over half a spool of chain for the old saw which is .325 Skip Tooth Chisel plus a few good 16" bars. I've been looking and looking for a clutch drum with a .325 sprocket that fits the T435. There is that option for the 435 but NOT the T435 as the oiler drive is different.

Does anyone have any ideas? There's obviously not a very high demand or they'd be available? Unless anyone knows of a source that I can't find.

 

[Chevboy0167]

Found LP .325

https://www.oregonproducts.com/en/s...25"low-profile--7-tooth---husqvarna/p/610729n

https://www.ebay.com/itm/1862391985...kdZz8ynlbDprhb18+gr7BmXQ==|tkp:Bk9SR7LZ_JLPZA

 

[J D]

I understand your desire to utilise the chain & bars you already have, but 3/8 lo pro would be a much more suitable choice for that saw. Safety wise I wouldn't recommend skip chain for a limbing saw, especially a top handle... & .325 won't do it any favors performance wise either

 

[J D]

Looking at those links they are drive sprockets for .325 LO PRO chain which is NOT THE SAME as regular .325. While that would be suitable for your saw it would require you to also buy matched chains & bars as the lo pro (nano) version is .043 guage & not compatible with regular .325