Sealing woodstove through bulkhead fittings

[RiverRat2]

Someone told me to use High temp fiberglass!!! what is the best stuff to use on the stack joints and wall do-nut??

 

[tla100]

I used high temp fire caulk, found by wood stove accessories at local hardware store I bought stove at.

Only used around double wall pipe that went thru my basement block wall. Did not seal any joints other than that....

 

[RiverRat2]

I used high temp fire caulk, found by wood stove accessories at local hardware store I bought stove at.

Only used around double wall pipe that went thru my basement block wall. Did not seal any joints other than that....

Thanks I will check it out

 

[cmsmoke]

Not sure, but the rope gasket material for furnace doors may work, if the gap isn't too big and is consistent.

 

[RiverRat2]

I used high temp fire caulk, found by wood stove accessories at local hardware store I bought stove at.

Only used around double wall pipe that went thru my basement block wall. Did not seal any joints other than that....

Just noticed the double wall pipe through the wall in your reply, the azz-clown at the local hardware didn't say anything about that !!!! where do I find that stuff