Stihl, 0.5mm Metal Cylinder Gasket?

[Trigger-Time]

Stihl, 0.5mm Metal Cylinder Gasket, Manual says "Fit new cylinder gasket, curvature facing down, on the crankcase."

Ok this hillbilly is not for sure if that means the raised rib on the
inside dia. of the gasket faces up or down. If it would said concave
or convex, then I would known.

 

[04ultra]

Stihl, 0.5mm Metal Cylinder Gasket, Manual says "Fit new cylinder gasket, curvature facing down, on the crankcase."

Ok this hillbilly is not for sure if that means the raised rib on the
inside dia. of the gasket faces up or down. If it would said concave
or convex, then I would known.

Protrusion up.... Just asked the man...




..

 

[Trigger-Time]

Protrusion up.... Just asked the man...

..

Thanks, I'm going back to saw shed to........................

 

[Lakeside53]

Hmmm... I think I gave the wrong info.. It is DOWN, but it really doesn't matter a lot... I always did it "up" until I found out the Stihl way, and they all worked.

Now I'm really late for dinner..

 

[04ultra]

Hmmm... I think I gave the wrong info.. It is DOWN, but it really doesn't matter a lot... I always did it "up" until I found out the Stihl way, and they all worked.

Now I'm really late for dinner..

:hmm3grin2orange: :hmm3grin2orange: :hmm3grin2orange: :hmm3grin2orange:


.

 

[Trigger-Time]

Hmmm... I think I gave the wrong info.. It is DOWN, but it really doesn't matter a lot... I always did it "up" until I found out the Stihl way, and they all worked.

Now I'm really late for dinner..

Well! ............................. its to late now, I guess I will live with it up side down.

I went ahead and bought a new Stihl PC kit for the 064, she is alive again!
(with a up side down gasket) :hmm3grin2orange:

 

[RiverRat2]

Put the raised rib against the bottom of tha Jug

Protrusion up.... Just asked the man...



..

Ive got three Saws running that way for going on over a year,,, No problemssss

that puts the concave side against the Crank case,,, Compra????? Manual just talks different,,,,, But he is right most all the time!!!!!!! Edit: But looking really close @ the IPL I think the concave looks like it is up!!!!! and you could say there are lines that look like tha rib,,,,, At least I am all the way,,, one way wrong again!!!!!!!!! Sheesh,,, I dont know,,, what did lakeside say

Trigger I will get that 066 Crank checked for you tomorrow morning and let you know some thing after Lunch time...... 10 - 4 ????

River,

 

[Lakeside53]

That will teach you to RUSH ME (I was already late...).


I'll call Stihl next week and ask someone I trust... I know it works both ways, but do want to know why they choose one over the other... Curvature facing down... Maybe they do mean the bump is UP.. I give up...

 

[04ultra]

That will teach you to RUSH ME (I was already late...).


I'll call Stihl next week and ask someone I trust... I know it works both ways, but do want to know why they choose one over the other... Curvature facing down... Maybe they do mean the bump is UP.. I give up...

:bang: :bang:


.

 

[RiverRat2]

Yep,,,,

:bang: :bang:


.

I'm with ya 04Ultra!!!!!!! :bang: :bang:

 

[Trigger-Time]

Hey, if you guys say it works both ways...........good enough!

I was a little embarrassed to ask if the "Bump" went up or down.
You guys not knowing for sure, makes me feel better


Andy, sorry about the late thing, but we had saw work to get done

 

[Trigger-Time]

Ive got three Saws running that way for going on over a year,,, No problemssss

that puts the concave side against the Crank case,,, Compra????? Manual just talks different,,,,, But he is right most all the time!!!!!!! Edit: But looking really close @ the IPL I think the concave looks like it is up!!!!! and you could say there are lines that look like tha rib,,,,, At least I am all the way,,, one way wrong again!!!!!!!!! Sheesh,,, I dont know,,, what did lakeside say

Trigger I will get that 066 Crank checked for you tomorrow morning and let you know some thing after Lunch time...... 10 - 4 ????

River,

River, is that like 10-4 good buddy or between 10am and 4pm
I'm in no big rush and I don't want to make anyone else late for their
dinner! Andy:hmm3grin2orange:

 

[Trigger-Time]

I would also like to thank 04ultra for going out of his way on
this "Bump" thing....................even if it its wrong!:hmm3grin2orange:

 

[04ultra]

I would also like to thank 04ultra for going out of his way on
this "Bump" thing....................even if it its wrong!:hmm3grin2orange:

THX Gary

It's only wrong if you look at it from the wrong direction... If you tip the saw upside down it will be right on the left side of wrong..
.

 

[Trigger-Time]

THX Gary

It's only wrong if you look at it from the wrong direction... If you tip the saw upside down it will be right on the left side of wrong..
.

Why did'nt I think of that! :bang: